Characteristics of Olympus Stereoscopic Microscope SZX10
1. Used for observing image instances, printed circuit boards, cables, electronic components;
2. In addition to a 10x zoom ratio, it also achieved technical performance with a working distance of 81 mm and a numerical aperture of 0.1 (when using a 1x objective lens).
3. There are two types of objectives, including 1x objective that emphasizes workability, and 1.25x objective that emphasizes high magnification and NA.
4. Adopting a distortion free design that allows observation of the original appearance of flat samples. Due to distortion correction, it can be observed that the image has smaller protrusions and no distortion at the edge of the field of view.
5. The adoption of a thin LED transmission lighting base LED with high operability and economy reduces the thickness to half of the original transmission lighting device. Samples can be placed at a lower position during observation and homework to suppress the lowering of the viewpoint. It can be used for bright field, dark field, and polarized light observation, with approximately half the electricity consumption, making it cost-effective.
6. Equipped with various reflective lighting devices such as circular lighting, coaxial reflective lighting, etc. Suitable lighting environments can be selected based on the sample and its intended use.
7. To address the issue of eye fatigue during microscopic observation, we have commercialized observation tubes equipped with convergence angles. In addition, we have also prepared a tilted observation tube that allows for natural posture observation and adjustable eyepiece angle without worrying about individual height differences when sitting down.
8. The frequently used zoom knob and focus adjustment knob are located very close to each other, making it easy to switch between focusing and zooming operations. In addition, it also reduces the movement of the focus fine adjustment knob, making it easier to focus during high magnification observation.
Zoom/coarse/fine adjustment knob

Technical parameters of Olympus stereomicroscope SZX10

1. Tube tilt angle: 5-45 °, optical path switching: 2-segment TTR: 100% for both eyes, 50%/50% for both eyes TTRPT： 100% for both eyes and 100% for photography.
2. Focus on institutions:
SZX2-FO： The coarse adjustment knob has a stroke of 80mm (each round of coarse adjustment stroke is 36.8mm), and the load-bearing range is 0-10.0kg
SZX2-FOF： The coarse adjustment knob has a stroke of 80mm (36.8mm per turn for coarse adjustment), and the fine adjustment knob has a stroke of 80mm (0.77mm per turn for fine adjustment), with a load-bearing range of 2.7-15.0kg
SZX2-FOFH： The coarse adjustment knob has a stroke of 80mm (36.8mm per turn for coarse adjustment), and the fine adjustment knob has a stroke of 80mm (0.77mm per turn for fine adjustment). It is equipped with built-in gas to maintain balance and has a load-bearing range of 8.0-25.0kg
ZX-FOA2： Electric focusing device/focusing method: stroke of 75mm (electric coarse adjustment stroke of 1.5mm/sec per turn micro adjustment: 0.3mm/sec), load capacity range: 2.7-15.0kg
3. Carrier platform:
SZX2-ST： Standard stand/pillar height: 270mm, size: 284 (W) × 335 (D) × 31 (H) mm
SZX2-STL： Large scaffold/pillar height: 400mm, size: 400 (W) × 350 (D) × 28 (H) mm