VIP member
Product details
Inert Gas Ovens
Scope of application:
Suitable for high-temperature treatment such as non oxidative drying, curing, welding, annealing, etc. in semiconductors, optoelectronic components, energy raw materials, communication products, electromechanical products, etc.
Packaging testing; All Lead PKG, BGA, MCM; Pre curing and hardening of organic polymer films using photolithography technology; Silver paste solidification, post mold solidification, electroplating annealing; Substrate moisture removal, wafer drying and annealing, etc.
Product features:
1. Sealing design: SUS304 stainless steel plate is used as the inner material, and the entire inner barrel is fully welded with argon arc welding to prevent air from entering the oven and save inert gas;
2. External dustproof treatment: The outer material is SPCC steel plate, which has been washed with soda water and then powder coated with paint;
3. Energy saving: The insulation material is high-density fiber cotton, which has good insulation effect;
4. Layered structure design: The height of the inner box layer board can be adjusted and freely removed;
5. Freedom of movement: The box has movable casters that can be pushed and fixed in any position;
6. Efficient filter: Install high-temperature resistant and efficient filters to obtain a clean baking environment; (Optional)
7. Internal circulation air design: forced air supply for internal circulation to ensure uniform temperature;
8. Design of nitrogen preheating structure;
9. Cold system: equipped with a cooling system, which can reduce waiting time and improve efficiency; (Optional)
10. Wide temperature range selection;
Technical Parameter
|
Model number Specification parameters |
EPO-WY80L (A3~D) |
EPO- WY180L (A3~D) |
EPO- WY400L (A3~D) |
EPO-WY1350L (A3~D) |
||||||||
Inner box size (W * D * H) mm |
350*580*400 |
600*600*500 |
640*640*1000 |
990*1100*1250 |
||||||||
Number of working chambers |
1 Single cavity |
2 Dual chamber |
4 Four cavities |
1 Single cavity |
2 Dual chamber |
4 Four cavities |
1 Single cavity |
1 Single cavity |
2 Dual chamber |
|||
Dimensions (W * D * H) mm |
Based on the actual product (the outer box size varies depending on the temperature) |
|||||||||||
Working temperature range |
A3: Room temperature~200 ℃ A2: Room temperature~250 ℃ B2: Room temperature~350 ℃ C2: Room temperature~450 ℃ D: Room temperature~600 ℃ |
|||||||||||
oxygen content |
I：500ppm； II：200ppm； III：50ppmⅣ：20ppm |
|||||||||||
machine performance |
Control accuracy |
0.1℃ |
||||||||||
Uniformity of distribution |
±2.0℃% |
|||||||||||
|
Heating up time |
℃ |
175 |
250 |
|||||||||
min |
30 |
40 |
||||||||||
|
material |
External material |
SPCC steel plate powder baking paint treatment |
||||||||||
Internal material |
SUS # 304 stainless steel CNC bending forming |
|||||||||||
Thermal insulation material |
ceramic fiber |
|||||||||||
Sealing material |
Adopting high-temperature resistant silicone rubber |
|||||||||||
circulatory system |
Multi wing circulating fan |
|||||||||||
Nitrogen device |
Adjustable flow meter size (L/min) |
|||||||||||
heater |
Stainless steel high-speed heater |
|||||||||||
timer |
0.1S～9999H |
|||||||||||
Thermostat |
Ordinary standard/touch screen PLC program control type |
|||||||||||
Other accessories |
Layered storage rack (2 stainless steel punched plates) |
|||||||||||
Safety device |
Circuit system load protection, fan overload protection, heating cut-off when the temperature reaches the timer, fault warning light |
|||||||||||
Select accessories |
① Multi point temperature measurement viewing and recording function; ② Oxygen content analyzer; ⑥ Networking function; ⑦ HEPA high-efficiency filter; ⑧ Rapid cooling system |
|||||||||||
Power supply (V) |
220 |
AC 3-phase 5-wire 380V 50HZ |
||||||||||
Note: 1. The above data are all at an ambient temperature (QT) of 25 ℃ Measured under no-load conditions in the studio | ||||||||||||
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-