Product Features

• 1、The heater rapidly heats the sample to the evaporation temperature,At the same time, the gas is blown onto the surface of the solution through a gas needle，shortsendRapid evaporation of solution and concentration of sample.
  2、The height of the air chamber can be adjusted，The standard needle length is80mm.
  3、Each blowing needleequalIndependently controllable, capable of individual blowing and flow regulation, without wasting gas.
  4、When concentrating toxic solvents,The entire system can be placed in a fume hood.
  5、Built in over temperature protection device，Automatic fault detection and alarm function.
  6、LEDdisplay,temperaturesynchronousDisplay, time decreasing displayThe operation is simple and convenient.
  7、Standard equipped with air chamber and dedicated adjustable bracket.

performance index

• PRODUCT MODEL	NG150-1A 96Pore nitrogen blower
  temperature range	room temperature+5℃—150℃
  heating up time	≤30min(From)40℃ rises to150℃)
  Temperature accuracy（40~100℃）	±0.5℃
  Temperature accuracy（100~150℃）	±1℃
  Temperature stability（100℃）	±0.5℃
  Number of modules placed	1piece
  Display Accuracy	0.1
  Set the longest time	99h59min
  Nitrogen Flow Rate	0—10L/min
  Nitrogen pressure	≤0.1MPa
  maximum power	200W
  External dimensions	280x220x400 mm
  Module model selection	See alsoNG150-1ASeries replaceable modules

  
  
  NG150-1A 96Orifice plate nitrogen blowing instrument The following modules and flow control valves can be replaced

  model	Test tube diameter	Number of test tubes	MODULE SIZEmm
  NG16	0.2mlcentrifuge tube	96	78 x 114 x 26
  NG17	tablet	96Enzyme linked immunosorbent assay (ELISA) plate	81 x 123 x 19