Multi functional combustion tester/multi-functional flammability tester

Multi functional combustion tester/multi-functional flammability testerPurpose: To test the flammability of various materials by igniting the edges and bottom edges of vertical and vertical textiles and componentsThe characteristics of ignition and flame spread include small toys, clothing fabrics, curtains and curtains, pajamas, toys, protective clothing fabrics, and even building and other materials. For each material, this instrument can be set according to the precise condition requirements listed in standards such as GB, ISO, BS, ASTM, NF, etc., to perform these important tests.

Multi functional combustion tester/multi-functional flammability testerCompliant with standards:

ISO 69401995 Flammability Performance of Vertical and Vertical Specimens
ISO 6940： Flammability performance of vertical specimens in 2004
ISO 6941： 2003 Vertical and Vertical Sample Flame Spread Performance
ISO 10047： Determination of Burning Time on Fabric Surface in 1993
BS 5438： 1976 Vertical and Vertical Textiles and Components Flame Retardant Performance
BS 5438： 1989 Vertical Textile and Component Bottom and Edge Ignition Flame Retardant Performance
BS 5722： Flame retardant properties of fabrics and fabric combinations for pajamas in 1991
BS EN1103： 2005 fabric burning performance
BS EN 13772： 2003 Curtain and Curtain Flame Spread Performance

EN71-2Toy safety flammability testing
ISO 15025： Thermal insulation and flame retardant properties of 2002 protective clothing
AS 2755.1、 2. Flammability performance of vertical specimens in Australia and New Zealand
Chinese national standards such as GB/T 8745, GB/T 8746, GB/T 5456, etc

Multi functional combustion tester/multi-functional flammability testerProduct performance:

Floor standing machine base, no need to be placed on the operating table, convenient for operators to use;

Large combustion rack, capable of hanging various test needle frames to meet the needs of different testing standards;

Equipped with 8 types of test needle frames and 1 set of stainless steel sample clamps, meeting the testing standards of various countries;

BS EN 13772The nominal power of the Epiradator radiator is 500W, and the radiation surface is a semi transparent quartz glass disk with a diameter of 120mm2;

The power controller regulates the thermal radiation state and can adjust the power to 0-600W;

Micro switch triggering method, automatically recording combustion time;

The roller screw adjusts the forward and backward movement of the burner, and the height of the burner can be adjusted through a knob;

One key ignition method, using electric spark ignition;

Butane and propane combustion gases can be programmed to switch;

The flame angle indicator panel can display the operating angle;

The host comes with a flame height gauge to detect the vertical flame height;

Stepper motor drive mode can drive the burner to move;

The angle accuracy of the ignition device is 0.18 degrees, providing precise positioning;

The host adopts outdoor operation mode, which can protect the safety of testers;

The support arm system can rotate freely 180 degrees, making it easy for testing personnel to operate;

The touch screen can rotate freely 360 degrees, making it easy for operators to use;

SimensHuman machine interface and PLC control mode, prefabricated testing standards from various countries;