Introduction to Mineral Processing Shaker

Mineral beneficiation shaker is a gravity beneficiation equipment used for the separation of fine-grained materials. It is mainly used for different beneficiation operations such as coarse selection, selection, and sweeping of iron, manganese, gold, tungsten, lead, tin, chromium, titanium, bismuth, tantalum and other non-ferrous metals, black metals, and rare and precious metal minerals at the level of 2-0.02mm sand and mud; In addition, there is also the selection of pyrite with a thickness of 4-0.02mm; After appropriately changing the bed bar type, separate the fine coal and coal slurry, as well as other mixed materials with sufficient density difference and particle size composition, and separate materials with different particle sizes such as coarse sand, fine sand, and mineral mud. Jihong Machinery can also be considered to have gone through the development history of shaking tables, from the initial straight bar bed surface shaking table to the single curved wave bed surface shaking table, and then to the double curved wave bed surface shaking table. Jihong Machinery has been striving for innovation and research. Nowadays, the processing capacity, recovery rate, and enrichment ratio of the new shaking table produced by Jihong Machinery are quite high.

Working principle of mineral processing shaker

The shaking table utilizes the difference in specific gravity of the sorted minerals, the differential motion provided by the head of the bed, the inclined water flow, and different forms of bed bars to cause loose layering of mineral particles on the bed surface, selectively transport them, and form fan-shaped zones on the bed surface, thereby producing products of different wealth levels.
The mineral selection process of a shaking table is carried out on an inclined bed surface with multiple bars. The ore particles are fed into the feeding trough at the upper corner of the bed surface, and horizontal flushing water is supplied by the feeding trough. Therefore, the ore particles are layered according to specific gravity and particle size under the action of gravity, horizontal water impact force, inertia and friction generated by the reciprocating asymmetric motion of the bed surface, and move longitudinally and laterally along the inclined bed surface. Therefore, mineral particles with different densities and particle sizes gradually flow down in a fan-shaped manner from side A to side B along their respective motion directions, and are discharged from different zones on the concentrate end and tailings side, and finally divided into concentrate, intermediate ore, and tailings.

Advantages of mineral selection shaker

1. It has a high enrichment ratio, good sorting efficiency, and simple operation. And obtain the final concentrate and tailings at once.
2. Compared with traditional craftsmanship, it has the advantages of no need for chemicals, low energy consumption, and easy management, and has a higher cost performance ratio.
3. Long service life, easy to maintain and repair.

Technical parameters of mineral selection shaker

Note: The equipment model parameters are constantly being improved. If you cannot find the required model in the parameter table, you can contact us directly. Our technicians will configure the equipment that best suits your production needs and site requirements according to your requirements.