VIP member
Microwave silicon carbide micro powder drying equipment
The microwave silicon carbide micro powder drying equipment is a typical representative of the many powder drying equipment produced by our company
Product details
Microwave silicon carbide micro powder drying equipmentIt is a typical representative of the numerous powder drying equipment produced by our company. Also known as abrasive micro powder drying equipment or silica fume powder drying machine, with the widespread application of silicon carbide ultrafine powder, silicon carbide micro powder drying equipment has also received widespread attention. Due to the large amount of dust, the use of drum and other drying equipment can cause serious environmental pollution, and other box type high-temperature drying equipment can also affect the working environment of the workshop.
The silicon carbide microwave drying equipment solves the problem of drying in the research and production of silicon carbide, and solves the problems of high energy consumption and long time of traditional silicon carbide drying equipmentMicrowave drying equipmentThe specific characteristics are manifested in:
1. Silicon carbide microwave drying equipment can dry silicon carbide quickly, usually in about ten minutes, achieving the purpose of microwave drying and achieving continuous production.
2. Silicon carbide microwave drying equipment dries silicon carbide evenly, resulting in good product quality;
3. The silicon carbide microwave drying equipment is non-contact drying, pollution-free, and achieves high purity quality.
4. Silicon carbide microwave drying equipment is safe, energy-saving, and environmentally friendly for drying silicon carbide. It uses electricity and dries both inside and outside simultaneously
5. Using silicon carbide microwave drying equipment to shorten the production cycle and greatly reduce the occupation of production working capital
6. Silicon carbide microwave drying equipment with a temperature below 40 ℃ to improve the working environment for workers
Guangzhou WeiyasiThe silicon carbide drying equipment used in production adopts a conveyor belt to send the carbonized master's silicon powder into a tunnel drying box. After rapid heating, the product can be dried in 5-8 minutes, with fast speed, high efficiency, and low labor intensity, which can bring good economic benefits to the application enterprises. Silicon carbide powder is a micron sized silicon carbide powder that is crushed and classified using grinding equipment.
Our abrasive micro powder drying equipment can not only dry black silicon carbide micro powder and green silicon carbide micro powder, but also be used for other purposesPowder material drying equipmentIt has a wide range of applications and is suitable for drying various chemical powder materials with drying temperature requirements controlled between 80-150 degrees and moisture content below 30%. For example, lightweight calcium carbonate, nanoscale ultrafine calcium carbonate, magnesium carbonate, aluminum hydroxide, strontium carbonate, barium carbonate, insurance powder, barium sulfate, potassium sulfate, nickel sulfate, lithium hydroxide, nickel hydroxide, barium chloride, calcium chloride, lithium carbonate, zinc sulfate, etc. So it is also known as ultrafine powder dryer, nano material dryer, Lide powder dryer, dye dryer, kaolin dryer, zinc oxide dryer,Flame retardant drying equipmentDiatomaceous earth dryer, rare earth oxide dryer, magnesium sulfate dryer, sludge dryer, etc.
Silicon carbide micro powder drying equipmentParameters:
1. Equipment working power supply: three-phase five wire 380V ± 10%
2. Microwave operating frequency: 2450MHz ± 50MHz
3. Microwave power: 60KW (adjustable)
4. Dehydration rate: 60 kg/hour
5. Drying temperature 80-120 degrees (adjustable and controllable)
6. Height of inlet and outlet: 50mm
7. Belt width: 900mm
8. Transmission speed: 0-5 m/min (variable frequency speed regulation)
9. Microwave leakage: National standard ≤ 5mw/c ㎡
10. Dimensions (length x width x height): approximately 11830 x 1510 x 1750mm
11. Execution standard: Complies with the domestic GB5226 electrical standard
As this device is a non-standard device, the above parameters are for reference only. If you have any questions about the price, manufacturer, model, or pictures, please contact us for new information.
The silicon carbide microwave drying equipment solves the problem of drying in the research and production of silicon carbide, and solves the problems of high energy consumption and long time of traditional silicon carbide drying equipmentMicrowave drying equipmentThe specific characteristics are manifested in:
1. Silicon carbide microwave drying equipment can dry silicon carbide quickly, usually in about ten minutes, achieving the purpose of microwave drying and achieving continuous production.
2. Silicon carbide microwave drying equipment dries silicon carbide evenly, resulting in good product quality;
3. The silicon carbide microwave drying equipment is non-contact drying, pollution-free, and achieves high purity quality.
4. Silicon carbide microwave drying equipment is safe, energy-saving, and environmentally friendly for drying silicon carbide. It uses electricity and dries both inside and outside simultaneously
5. Using silicon carbide microwave drying equipment to shorten the production cycle and greatly reduce the occupation of production working capital
6. Silicon carbide microwave drying equipment with a temperature below 40 ℃ to improve the working environment for workers
Guangzhou WeiyasiThe silicon carbide drying equipment used in production adopts a conveyor belt to send the carbonized master's silicon powder into a tunnel drying box. After rapid heating, the product can be dried in 5-8 minutes, with fast speed, high efficiency, and low labor intensity, which can bring good economic benefits to the application enterprises. Silicon carbide powder is a micron sized silicon carbide powder that is crushed and classified using grinding equipment.
Our abrasive micro powder drying equipment can not only dry black silicon carbide micro powder and green silicon carbide micro powder, but also be used for other purposesPowder material drying equipmentIt has a wide range of applications and is suitable for drying various chemical powder materials with drying temperature requirements controlled between 80-150 degrees and moisture content below 30%. For example, lightweight calcium carbonate, nanoscale ultrafine calcium carbonate, magnesium carbonate, aluminum hydroxide, strontium carbonate, barium carbonate, insurance powder, barium sulfate, potassium sulfate, nickel sulfate, lithium hydroxide, nickel hydroxide, barium chloride, calcium chloride, lithium carbonate, zinc sulfate, etc. So it is also known as ultrafine powder dryer, nano material dryer, Lide powder dryer, dye dryer, kaolin dryer, zinc oxide dryer,Flame retardant drying equipmentDiatomaceous earth dryer, rare earth oxide dryer, magnesium sulfate dryer, sludge dryer, etc.
Silicon carbide micro powder drying equipmentParameters:
1. Equipment working power supply: three-phase five wire 380V ± 10%
2. Microwave operating frequency: 2450MHz ± 50MHz
3. Microwave power: 60KW (adjustable)
4. Dehydration rate: 60 kg/hour
5. Drying temperature 80-120 degrees (adjustable and controllable)
6. Height of inlet and outlet: 50mm
7. Belt width: 900mm
8. Transmission speed: 0-5 m/min (variable frequency speed regulation)
9. Microwave leakage: National standard ≤ 5mw/c ㎡
10. Dimensions (length x width x height): approximately 11830 x 1510 x 1750mm
11. Execution standard: Complies with the domestic GB5226 electrical standard
As this device is a non-standard device, the above parameters are for reference only. If you have any questions about the price, manufacturer, model, or pictures, please contact us for new information.
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-