Mal roughness profilometer UD130-Fornitore globale

Unit 05, 3rd Floor, Building 16, No. 8 Liangshuihe Second Street, Beijing Economic and Technological Development Zone

Horizontal axial characteristics
Tracking length: 0.1 mm to 130 mm
Automatically cut off the safe contact of each feed motor: front and rear
Positioning speed: 0.1 mm/s to 30 mm/s
Measurement speed: 0.1mm/s - 5mm/s
Distance of contour points in X direction: 0.25 μm to 10 μm
Maximum number of measurement points for a single measurement: 520000 points
Tracking power: adjustable through software

Characteristics of Needle Measuring System
Measuring needle range: 10 mm
Force measurement: adjustable through software

Residual value

Measurement and evaluation shall be conducted in accordance with DIN EN ISO 3274
Residual value of 0.1mm/s Rz<40 nm
Residual value of 0.5mm/s Rz<50 nm

outline
The measurement conditions are shown in the needle data sheet:
The length and radius values are in metric millimeters:
Distance measurement display deviation: ± (1.0 + 2 l / 150) μm; l in mm
Radius measurement display deviation: (R ≤ 10 mm) ± 1.5 μm
(10 mm < R ≤ 300 mm) ± (3R /20) μm R in mm

General items
Operating temperature:+ 15 °C to + 35 °C
Working temperature for obtaining technical data: 20 °C ± 2 K
According to VDI/VDE2627, it is recommended that the measurement room level be 2 or higher

Mal measuring instruments use leading technology to achieve excellent simultaneous contour and roughness measurements in one measurement. These measurement stations combine the experience of the first generation of measuring instruments and have been deeply developed.
• Large measurement range of 130/260mm
• The contour and roughness are completed in one measurement
Ultra high measurement and movement speed save measurement time
Innovative probe system design
Magnetic clamping allows for quick and reliable replacement of measuring needles, and synchronous recognition
260mm ultra long scanning length (MarSurf LD 130) with a drop of 13mm (100mm measuring needle length) or 26mm (200mm measuring needle length) in one scan
Modular structure, easy to maintain
• Maintenance does not require complete disassembly

• Ultra high measurement and movement speed

MarSurf UD 130 with measuring workbench

Adopting a built-in optical system for measurement, ensuring high-precision contour and roughness measurement

For detailed information or configuration communication, please call/67902835