·Accept DC signal input from various devices on site, and after isolation, interference suppression, and other processing. Output standard 4-20mA current signal.

DC power supply mode, and supports output circuit power supply. The power supply is isolated between the input and output channels.

Standard 35mm DIN rail card installation. Plug and unplug terminal block with spring compression connection.

● Input

Input signal: 4-20mA, 1-5V, or other specified signal

Input impedance: 24 Ω for current input; Voltage input ≥ 500K Ω

● Output

Output current (lo): 4~20mA

Output circuit power supply voltage (Ue): 12-35V

Voltage drop (Ud): 3V

Output load resistance (RL): Calculation formula RL ≤ (Ue Ud) ÷ 0.02

Output ripple:<10mVp-p(Note: The selection of power supply voltage for the output circuit should be determined by the size of the load. If the voltage is too high and the load is very small, it will aggravate the heating condition of the isolator.)

● Power supply

Power supply voltage range: 20~30VDC

Rated supply voltage: 24VDC

Current consumption (when powered by 24VDC): 
<22mA (1 in 1 out);

<40mA (1 in 2 out);

<50mA (2 in, 2 out)

● Comprehensive parameters

Standard accuracy: ± 0.1%

Temperature drift: ± 0.015%/℃

Response time:<10ms

Isolation capability: 2.5KV, 1min, 50Hz between input output power supply

Insulation resistance: ≥ 100M Ω/500VDC between input output power supply

Working environment temperature: -20 to+60 ℃

Storage environment temperature: -40-+80 ℃

Shell material/protection level: PC (polycarbonate) material/IP20

Dimensions: 16 × 116 × 110 (mm)