brief

This machine is mainly developed and designed for ultra-fine powders that are prone to dust and high-precision packaging requirements. It completes dual speed filling, metering, and lifting work based on the signal provided by the weight sensor installed under the container. It is suitable for packaging additives, carbon powder, fire extinguisher dry powder, other ultra-fine powders, and powders with high-precision packaging requirements.

Main features

The pneumatic bag clamping device and bracket are mounted on the weight sensor, and are filled quickly and slowly according to the pre-set weight. The high response speed weighing system ensures high packaging accuracy.

The servo motor drives the tray to lift and lower, and the lifting speed can be set arbitrarily. During filling, there is basically no dust flying out and polluting the environment.

The filling screw sleeve with stainless steel sintered mesh filter interlayer, combined with a vortex air pump, can achieve degassing of the powder, reduce the air content in the powder, and decrease the volume of the powder.

The compressed air back blowing device blows back the filter screen to prevent it from being blocked by materials after prolonged use Death deteriorates the degassing effect of the machine.

'There is a filtering device in front of the intake pipe of the degassing vortex air pump to prevent materials from directly entering the air pump and damaging it.

Servo motor and servo drive control screw, with stable performance and high accuracy; The power of the servo motor has been increased, and a planetary reducer has been added to prevent the resistance of the material degassing screw rotation from increasing and causing overload of the servo motor

PLC control, touch screen human-machine interface display, easy to operate.

All stainless steel structure; Combination or open type material box, easy to clean

The filling head is equipped with a handwheel to adjust the height, making it easy to achieve packaging of various specifications.

The fixed screw installation structure will not affect the material properties during filling.

Workflow: Manual bagging or canning → Container lifting → Rapid filling while container lowering → Weight reaching the predetermined value → Slow filling → Weight reaching the target value → Manual container retrieval.

Pneumatic bag clamping device and can support device are available for selection, just choose different devices to meet the requirements of canning and bagging.

There are two working modes that can be switched, quantitative or real-time weighing. Quantitative weighing has fast speed but slightly lower accuracy, while real-time weighing has high accuracy but slightly slower speed.

Parameters