Centrifugal separation technology is a new technology developed based on the state of particles in a practical centrifugal environment. Particles of different densities, sizes, or shapes settle in centrifugal environments at different speeds, so a generally spherical heterogeneous mixture can be separated by centrifugation. Centrifuges are used to separate large amounts of substances without studying biochemistry. For example, collecting cells Separate plasma, separate DNA and proteins from these purified preparations, and isolate viruses and large-scale Escherichia coli Strict cellular composition Nuclear protein particles, etc.

1: Use power supply. AC 220V 50HZ

2: Whole machine power. 200W

3: Speed 500-4000 revolutions per minute

4: Centrifugal capacity 50ml×6

5: Timing range: 0-60min or normally open

6: Relative centrifugal force: 2800xg

　　Large capacity low-temperature centrifugeUsage: First, add the substance to be separated into the centrifuge tubes provided with this machine, insert them into the centrifuge head holes respectively (the amount of substance added to each centrifuge tube must be basically equal), close the cover plate, and turn on the power Turn on the switch, the power indicator light will turn on, and then select the "timer" to the desired centrifugal working time or to the normally open position (counterclockwise to the end point). At this point, the centrifuge will enter the working state. The speed can be selected at the appropriate position according to the needs.

Precautions for large capacity low-temperature centrifuge:

1: It is strictly prohibited for any liquids or other debris to enter the centrifuge chamber, otherwise it may damage the main unit.

2: The instrument casing should be properly grounded to prevent accidents caused by moisture damage to the entire machine.

3: When the centrifuge head is running at high speed, please do not open the upper cover casually for maintenance and accessories. If you find that the centrifuge head is eccentric when using this machine, please have experienced personnel repair it. First, open the bottom cover, check if the three pillars of the motor are offset, and make adjustments. If there are any other situations, notify our factory for repair