characteristic

conform toISO 18000—6 C, compatibleEPC C1 G2standard

160positionEPCStorage Area: Up to128positionEPC

96positionTIDStorage Area: Up to48Serial Number

Available user storage area: up to1008Non volatile user data

Passive mode long-distance:5m

Expansion range of battery assisted passive mode:20m

LEDvisual indicator

describe

JT-LED INDICATORIt is based on passive sensor technologyEPC C1 G2 RFIDlabel. Using hardPCBDesign labels. this oneLEDindicativeRFIDLabel usedUHF RFIDReader（EPC C1G2）2WofERPPower, passive mode read distance5About meters.

JT-LED INDICATORIt can be customized according to different antenna designs and sizes, depending on the specific application. It can be encapsulated inIP67perhapsIP68Used in harsh environments within the casing. Customization can also be made according to requirementsLEDThe specifications.

JT-LED INDICATORTags byROCKY100Chips andLEDComposed of indicator lights.

ROCKY100The chip includes components forUHF RFIDPower Acquisition and CommunicationRFFront end, power module that generates the required voltage, and includingPWMModules andEPC C1G2/ISO18000-6CDigital processor.

The device contains capacitorsCTo support peak current during flashing. When receiving fromUHF RFIDReader'sPWMWhen a directed read request is made,ROCKY100 PWMModule throughGLEDThe switch willLEDConnect the negative pole toVSS.JT-LED INDICATORWill be set according to the configurationPWMFlashing in configuration.

characteristic

work

EPCread

In order to read the labelEPC, can use universalEPC C1G2Reader. However, some factors must be considered. Due to the tag having a connection toVDDThe charging capacitor of the power supply will result in slow system power up. It needs to last for a few seconds. To speed up the charging process, the reader should be configured to transmit power as continuously as possible. Once the power capacitor is fully charged, starting from this point, the memory access command can be used to access itSPIBridge control additional function reads the labelEPC.

Flashing trigger

JT-LED INDICATORlabelLEDThe flicker can use standardEPCTriggered by the read command. This command can use its knownEPCThe number points to a unique label.