1、 Product performance
JX-8500ZG191It is a high-performance liquid scale inhibitor/dispersant used for controlling membrane separation systemsCaCO3、 CaSO4、 BaSO4And SrSO4And scaling caused by the precipitation of iron oxide. After using this scale inhibitor, the system cleaning cycle can be extended, the membrane life can be prolonged, and the cost can be reduced.
JX-8500ZG191Product Features
1. Can be used for producing drinking water systems;
2. Compatible with organic flocculants;
3. Effectively control the scaling of calcium carbonate, calcium sulfate, barium sulfate, and strontium sulfate, with an L.S.I value of up to 3.0, preventing scaling;
4. Suitable for major reverse osmosis membranes such as Heiden Membrane in the United States, Dow Membrane in the United States, General Fluid Membrane in the United States, Toray Membrane in Japan, and Sehan Membrane in South Korea;
5. Disperse and block particles to maintain the cleanliness of the reverse osmosis membrane surface;
6. The pH range of the influent from 5-9 is still within the effective range;
7. It can be directly added to the original solution or added after dilution.
2、 Technical indicators
Project |
Indicator |
Appearance |
Slightly yellow or colorless transparent liquid |
Density (20 ℃) g/cm3 |
1.10-1.35 |
PH value (5% aqueous solution) |
10-11 |
Freezing point ℃ |
-15 |
3、 Usage method
The feeding position of JX-8500ZG191 is generally before the precision filter, with a typical dosage of 2-6 mg/L, depending on the customer's water quality and the operation of the RO equipment. It can be directly added or diluted for use, and RO produced water or desalinated water should be used for dilution. The dilution ratio at room temperature generally does not exceed 10.
4、 Packaging and Storage
JX-8500ZG191Packaged in plastic drums, each weighing 25kg or determined according to user needs. Store in a cool and ventilated place indoors, with a shelf life of two years.
5、 Safety and Protection
JX-8500ZG191Has a certain degree of irritation to the skin, protective equipment should be worn during use to prevent splashing onto the eyes or skin. If it splashes onto the eyes or skin, it should be washed with water immediately.