1、 Product performance

Cleaning pre film agentIt is mainly composed of phosphonates and active compounds. This product forms a deposition film on the metal surface by chelating with calcium and magnesium ions in cooling water, which adheres to the metal surface. This type of membrane has high resistance and can isolate metal from corrosive media in water, thereby inhibiting corrosion.This productIt has the characteristics of fast film formation speed, fine and uniform film quality, good chemical stability, and low corrosion rate.

2、 Technical indicators

3、 Scope of use

It can be used for pre coating of heat exchange equipment and pipelines in industrial water circulation cooling water systems such as chemical, fertilizer, refining, oil fields, metallurgy, and power generation after the start-up or system maintenance of new devices, forming a protective film on the metal surface to prevent corrosion of carbon steel, copper alloy, stainless steel and other materials during operation.

4、 Usage method

Efficient pre film agentThe dosing concentration is generally 300-500mg/L, which is directly added to the inlet of the collection tank pump. The pre film time is 48-72 hours for cold state and 24-48 hours for hot state. Emissions to total inorganic phosphorus less than 10 mg/L (based on PO)₄³Calculate).

5、 Packaging and Storage

This productPackaged in plastic drums, each weighing 25kg or determined according to user needs. Store in a cool and ventilated place indoors, with a storage period of ten months.

6、 Safety and Protection

This product has a certain degree of irritation to the skin. Protective equipment should be worn during use to prevent splashing onto the eyes or skin. If it splashes onto the eyes or skin, it should be washed with water immediately.