Beijing Jiaxin Hengsheng Environmental Protection Technology Co., Ltd
Home>Products>JX-8100ZG4 low hardness water (soft water) corrosion and scale inhibitor
Product Groups
Firm Information
  • Transaction Level
    VIP member
  • Contact
  • Phone
    13911124730
  • Address
    Building 11, No.1 Chaoqian Road, Changping District Science and Technology Park, Beijing
Contact Now
JX-8100ZG4 low hardness water (soft water) corrosion and scale inhibitor
JX-8100ZG4 low hardness water (soft water) corrosion and scale inhibitor
Product details

JX-8100ZG4低硬度水(软水)缓蚀阻垢剂.jpg

1、 Product performance

The corrosion and scale inhibitor JX-8100ZG4 is mainly composed of special interfacial active agents, high-efficiency dispersants, corrosion inhibitors, etc., and is suitable for systems with low hardness as cooling media such as softened water. Soft water does not contain calcium or magnesium ions, so scaling does not occur. Therefore, corrosion inhibition becomes the main problem. Many corrosion inhibitors use divalent cations such as Ca2+and Mg2+in chelated water to form a protective film on the metal surface, thereby exerting a corrosion inhibition effect. Due to the extremely low levels of Ca2+and Mg2+in soft water, corrosion inhibition in soft water is much more difficult than in other water qualities. Based on extensive experimental screening, we have selected JX-8100ZG4, a green and environmentally friendly carbon steel corrosion and scale inhibitor specifically designed for softened water. It is a hybrid corrosion inhibitor that mainly inhibits metal polarization to achieve corrosion inhibition. Corrosion and scale inhibitor JX-8100ZG4 does not contain toxic substances such as nitrite and chromate, and does not pollute the environment. The corrosion and scale inhibitor JX-8100ZG4 has a much lower corrosion rate on carbon steel than the national standard when used normally.

2、 Technical indicators

Project

Indicator

appearance

Yellow transparent liquid

Solid content% ≥

30.0

Density (20 ℃)g/cm3

1.20

pH(1% aqueous solution)

3.0±1.5

3、 Usage method

Add the daily required corrosion and scale inhibitor JX-8100ZG4 into the plastic dosing bucket (or box). For ease of use, dilute it with soft water and continuously add the agent at the inlet of the circulation pump (i.e. the outlet of the collection tank) using a metering pump or by adjusting the valve. The dosing concentration is generally 30-70ppm (based on the amount of supplementary water).

4、 Packaging and Storage

Corrosion and scale inhibitor JX-8100ZG4 is packaged in plastic drums, 25kg/drum or determined according to user needs; The storage period is ten months.

5、 Safety and Protection

JX-8100ZG4It is an acidic product, and protective measures should be taken when using it. If accidentally splashed in the eyes, rinse immediately with clean water.


JX-8100ZG4 low hardness water (soft water) corrosion and scale inhibitor
Online inquiry
  • Contacts
  • Company
  • Telephone
  • Email
  • WeChat
  • Verification Code
  • Message Content

Successful operation!

Successful operation!

Successful operation!