1Product Introduction:

JHZ-90/-180FeederIt mainly consists of five parts: chassis, feeding control device, electric control device, vibration device, feeding device, alarm device (equipped according to customer needs), etc. When the machine is turned on, the bait is thrown and fed through the control feeding port (infinitely adjusted according to the feeding situation of the fish) with the rotation of the feeding wheel. Feeding control is divided into timed and automatic (automatic shutdown after feeding is finished).

2Working principle:

When the feeding machine is working, the feed in the feeding box is evenly dropped into the feeding tray through the vibration feeding mechanism. The dropping is controlled by adjusting the handle and locking nut. The microcomputer control system is used to control the working time of the motor, enabling the feeding machine to achieve the purpose of timed, quantitative, and fixed-point feeding of granular feed.

3Product features:

3.1.FeederIt has overheat protection, anti leakage, and rust prevention design.

3.2.The control system is designed tightly and highly moisture-proof.

3.3.Adjustable feeding time and feeding interval.

3.4.Adjustable feeding amount.

3.5.Large feeding area close to120㎡, and the distribution is more even and conducive to fish feeding than manual spreading.

4Installation and Debugging:

4.1.Fix the feeding machine on a horizontal feeding platform, connect the ground wire, and turn on the power.

4.2.Pour the pellet feed into the feeding box to remove impurities from the feed to prevent blockage of the feeding port.

4.3.Turn on the power switch and use the electrical control box to control itFeederThe working hours, feeding time, and feeding interval time.

4.4.The working time is usually one hour, and the timing knob on the electrical appliance can be adjusted to the desired time position according to the feeding time.

4.5.The feeding gap times are as follows:3In seconds5In seconds7In seconds11Seconds and17There are five gears per second, and users can adjust the knob to the desired time position according to the feeding situation of the fish. Adjust the feeding amount by adjusting the handle.

5Main technical specifications: