Installation site

This transmitter can operate normally even under harsh environmental conditions. For long-term correct and stable use, please pay attention to the following points when choosing the installation site.

1) Environmental temperature

Please try to avoid installing in places with large temperature changes or obvious temperature gradients. If exposed to thermal radiation in the workshop, insulation radiation and ventilation measures should be taken.

2) Air conditions

Please avoid installing in corrosive environments. If used in a corrosive environment, ventilation should be done well and attention should be paid to avoiding rainwater from entering the conduit.

3) Shock and vibration

The transmitter should be installed in places with less impact and vibration as much as possible (although the transmitter is designed to be impact resistant and vibration resistant).

Characteristics of pressure/differential pressure transmitters

◆ Small and beautiful appearance, light weight

◆ Range migration function, with two range migration ratios of 100:1 and 10:1

Damping: adjustable from 0 to 32 seconds, with a step time of 0.1 seconds

Zero point and full degree compensation correction function

Multi point correction of output current

◆ Display multiple monitoring variables, with optional pressure units

◆ Ultra low temperature OLED display (40~70C), LCD liquid crystal display optional

Output current square root function.

◆ It has self diagnostic and fault alarm output functions.

Equipped with EEPROM non-volatile memory, it is not afraid of losing data due to power failure and has the function of recovering original calibration data.

Remote and local parameter setting and functional configuration can be achieved through a HART communication controller and local buttons.

technical indicators