Industrial chiller TF-LS-1HP-Fornitore globale

Industrial ChillerTF-LS-1HP

1 .Industrial Chillerintroduce

Industrial chiller is a type of chiller, which can be divided into air-cooled industrial chiller and water-cooled industrial chiller. Its working principle is to inject low-temperature frozen water into the equipment that needs to be cooled down. The low-temperature frozen water takes away the heat inside the heating equipment and flows the high-temperature hot water back to the water tank for cooling, thus circulating and exchanging cooling to achieve the purpose of cooling the equipment.

2 .Industrial ChillerTechnical Parameter

project			Model/Specification
project			Industrial ChillerTF-LS-1HP
standard rating	KW		2.5
Total input power	KW		1.34
Power Supply			220V 50Hz
refrigerant	name		R22
refrigerant	control mode		capillary
compressor	type		Rolling rotor type
compressor	power	KW	0.87
condenser	type		Efficient copper tube with aluminum fins and low-noise external rotor fan
condenser	Cooling air volume	m3/h	1000
evaporator	type		Water tank coil
	Frozen water volume	m3/h	0.43
	Water tank capacity	L	27
	Inlet and outlet pipe diameter		DN25
water pump	power	KW	0.37
	internet traffic	m3/h	2
	lift	M	14
Safety protection	Compressor overheat protection, overcurrent protection, high and low pressure protection, and over temperature protection.
Mechanical dimensions	Long (L)	MM	650
	Width (W)	MM	550
	High (H)	MM	915

3. Industrial chiller parameter table:

model	Refrigeration capacity		Outlet pressure Kgf/cm	discharge l/min	Power W	Water tank capacity L	External dimensions Length * Width * Height mm
	Kw/h	Kca/h
TF-LS-0.3HP	0.3	258	0.1-0.6	0-20	260	5	505230500
TF-LS-0.6HP	0.6	516	0-2	0-60	1000	15	650500765
TF-LS-1HP	2.5	2150	0-2	0-60	1340	27	650550915
TF-LS-1.5HP	4	3440	0-2	0-60	1800	45	8006001065
TF-LS-2HP	5	4300	0-2	0-60	2200	45	8006001065
TF-S-2.33HP	7.38	6346.8	0-2	0-60	2760	45	8006001065
TF-LS-3HP	9.43	8109.8	0-2	0-60	3300	60	5508801160
TF-LS-4HP	12.6	10836	0-2	0-60	4300	80	12007151105
TF-LS-5HP	15.9	13674	0-2	0-60	6200	110	13507501445
TF-LS-6HP	18.9	16254	0-2	0-60	6410	180	13508001500
TF-LS-8HP	24.9	21414	0-2	0-60	7150	180	13508001580
TF-LS-10HP	32.5	27950	0-2	0-60	9900	200	13509001845
TF-LS-12HP	37.2	31992	0-2	0-60	11500	260	16109001850
TF-LS-15HP	48.6	41796	0-2	0-60	15100	300	18008001800
TF-LS-20HP	63	54180	0-2	0-60	18420	350	20008002000
TF-LS-30HP	97.5	83850	0-2	0-60	29750	400	230013502000
TF-LS-40HP	63*2	54180*2	0-2	0-60	35400	450	252014502030
TF-LS-50HP	79*2	67940*2	0-2	0-60	42300	500	252018002030
TF-LS-60HP	97.5*2	83850*2	0-2	0-60	60000	550	252019602170
1.Industrial ChillerThe cooling capacity is based on a chilled water inlet temperature of 12 ℃ and an outlet temperature of 7 ℃; The cooling air volume is calculated at 30 ℃, and the output air volume is calculated at 40 ℃. 2.Industrial ChillerScope of work: Temperature range of chilled water: 5 ℃ to 30 ℃; Temperature of chilled water inlet and outlet: 3 ℃ to 8 ℃; Cooling temperature range: used below 35 ℃; Temperature difference between inlet and outlet of cooling water: 8 to 10 ℃ * The above rules and dimensions are subject to change without prior notice