One:Digital constant temperature mixerbrief introduction

HT902The high-power magnetic heating mixer is made of reinforced magnetic steel and is suitable for large capacity mixing in various colleges, research institutes, health and epidemic prevention, environmental monitoring, medical, chemical and other units. This instrument uses an electric motor to drive magnetic steel, and uses magnetic lines and fields to drive the polyethylene with magnetic steel in the container to complete the mixing task. This instrument has high mixing efficiency and adjustable speed (stepless speed regulation), suitable for mixing solutions of different concentrations. It can be mixed in a sealed container. Its main features are high power and the ability to stir2000More than milliliters.

Secondly:Digital constant temperature mixerMain technical indicators:

Magnetic steel speed: 0-2400Conversion/Minute

Control range: Room temperature~150linear measure

Temperature uniformity: ±1℃

Temperature fluctuations: ±1℃

Power supply voltage: 220Ⅴ±10％50HZ

Motor power: 10W

Heating power: 250W

face: ￠150

Three:Digital constant temperature mixerprecautions

1When adjusting the speed, gradually shift from low speed to high speed. It is not allowed to start directly from high speed to avoid the agitator being out of sync and causing jumping.2.When the stirrer jumps, the power should be cut off to check whether the bottom of the beaker or solvent is flat, the position is correct, and the voltage is normal.

3.The heating time should generally not be too long, intermittent use can prolong the service life. You can also preheat the solution to be stirred in another place before placing it on this machine for operation.4.If any abnormal situation is found, immediately shut down the machine and cut off the power for inspection. Do not disassemble or repair if you do not understand electrical principles. Please notify our factory for repair. If you do not follow the instructions and cause any adverse consequences, our factory will not be held responsible.

Four:Digital constant temperature mixerInstructions for use

Before using this machine, please read the user manual carefully,1.Firstly, check if the random accessories are complete, then install the fixtures in order and place the beaker that needs to be stirred in the center of the working surface.2.After adding the solution, place the stirrer in the beaker solution and insert the thermostatic sensor into the solution.3.Connect the power and turn on the power switch.4.Select heating, set temperature, pressSETPress the key again▽ or △, press ▽ to decrease the number, press △ to increase the number, after setting, pressSETKey exit,The heating indicator light is on, and the machine starts working.5.Select speed control, rotate the speed control knob until you achieve your desired speed.

After the work is completed, place the speed control knob in the smallest position, the heating switch in the non working state, turn off the power switch, cut off the power, wipe the working surface clean, and there should be no water droplets or dirt residue on it.

dress box one

Beijing Jingcheng Huatai Instrument Co., Ltd