HS600 ultrasonic flaw detector

☆ Measurement range: 0-6000mm

☆ Operating frequency: 100-20000m/s

☆ Detection accuracy: ≤ 3%

☆ Indication error: ≤ 0.1%

Product Introduction

----------------------------------------------------------------------

HS600 ultrasonic flaw detectorIt is a portable flaw detector with a compact appearance, powerful functions, convenient use, and excellent cost-effectiveness, which can meet your routine daily applications.

TFT true color display, Chinese function hot key operation

High performance, safe and environmentally friendly lithium battery, module plug-in type

→ Probe interface: Q9-Q9

→ High speed USB interface, fast transmission, quick calibration, and simple operation

→ Testing channel: 30 sets, equipped with transverse wave testing, longitudinal wave testing, small angle testing, and surface wave testing

→ Storage capacity: 1000 frames

→ Adopting the EU certification standard EN12668-1:2010

Working frequency: 0.5-15MHz, 0.5-4MHz, 2-8MHz

Gain adjustment: 110dB (0.1dB, 2dB, 6dB step, fully automatic adjustment)

Vertical linear error: ≤ 3% Horizontal linear error: ≤ 0.1% Resolution:> 40dB（5N14）

Dynamic range: ≥ 36dB sensitivity margin:> 60dB (200mm deep, Φ 2 flat bottomed hole)

Scanning range: Zero interface incidence~6000mm steel longitudinal wave digital suppression: (0-80)%, does not affect linearity and gain

Detection methods: full detection, positive/negative detection, RF wave display

Working methods: Single crystal flaw detection, twin crystal flaw detection

Pulse intensity: 600V

Impedance matching: 200 Ω, 500 Ω optional

Equivalent input noise for each frequency band:

Attenuator accuracy: ＜ ± 1dB/12dB sound speed range: （100～20000）m/s

Power supply and voltage: direct current (DC) 7.2V ± 10%; AC 220V ± 10%

Working hours: Continuous work for more than 7 hours (powered by lithium batteries)

Environmental temperature: (-10~40) ℃ (reference value)

Relative humidity: (20-95)% RH

Dimensions: 205 × 138 × 65 (mm)

Weight: The whole machine comes with a built-in battery of 1.5 kg

1. One host

2. Two probe wires (Q9-Q9)

3. One power charger

4. One lithium battery

5. One battery charging cable

6. Carry a set of portable homework with you

7. A set of communication cables and communication driver software

8. One instrument carrying case

9. One copy each of the user manual, certificate of conformity, and warranty card