■ overview

HCNLow noise cage type regulating valve isCV3000One of the series products.

HCNLow noise cage type regulating valve can reduce the noise of compressed fluid. To adapt to gas throttling diffusion and expansion, the sleeve is equipped with many symmetrical small holes to reduce pressure drop. The valve core adopts a pressure balanced structure. The fluid channel presentsSStreamlined and equipped with a guide vane to improve fluid balance around the sleeve, resulting in low pressure drop loss, high flow rate, and low noise. The leakage of the regulating valve meets the requirementsANSI B16.104Standard. The regulating valve is equipped with a multi spring diaphragm or cylinder actuator, which has a compact structure and high output force. This product complies withGB/T4213-92Standard.

■ valve body

type Formula: Straight through single seat cast ball valve

Nominal diameter:40、50、80、100、150、200、250、300、350mm

Nominal pressure:ANSI 150、300、600 JIS10、16、20、30、40K PN1.6、4.0、6.4MPa

Connection type: flange sealing surface typeFF、RF、RJ、LG、MFM

Flange standard:JIS B2201-1984、ANSI B16.5-1981、JB/T79.1-94(PN1.6MPa)、JB/T79.2-94(PN4.0、6.4MPa)、HG20594-97、HG20618-97class

Welding connection: embedded weldingSW(40~50mm)butt weldingBW(65~350mm)

material Material: see table2 Material combination and operating temperature range of valve body and internal components·Allowable leakage of valve seat

upper valve Cover: Room temperature typeP -17~+230℃；

extendItypeEI +230~+566℃；

Note: The working temperature should not exceed the allowable range of various materials.

Cover type: bolt compression type

fill Material:VType PTFE packing, PTFE impregnated asbestos packing, asbestos braided packing, graphite packing

■ Valve components

Valve core type: pressure balanced valve core with combination sealing ring or piston ring

Flow characteristics: linear characteristics(LV)Refer to the diagram1

material Material: see table2 Material combination and operating temperature range of valve body and internal components·Allowable leakage of valve seat

Piston ring material: see table2 Material combination and operating temperature range of valve body and internal components·Allowable leakage of valve seat

■ actuator

type Formula:HAMulti spring thin film actuatorVA6Single acting cylinder piston actuatorVPDouble acting cylinder piston actuator

Diaphragm material: Ethylene propylene rubber with nylon cloth, Nitrile rubber with nylon cloth

Spring range:80~240KPa

Gas supply pressure:140~400KPa(HAtype)、400~500KPa(VA6TypeVPtype)

Gas source interface:RC1/4'(HA、VAtype)、RC3/8'(VPtype)

Environmental temperature:-30~+70℃

■ Valve action mode

Using positive or negative acting actuators to achieve valve gas flow-Guan or Qi-open

■ attachment

Locator（HEPTypeYT1000Type), air filter pressure reducer, holding valve, travel switch, valve position transmitter, handwheel mechanism, etc

■Structural image