·The configuration is universal, and the installation hole is diameter 8

·Inside/External measurements are interchangeable and can be pre-set for measurement

·Standard configuration: A pair of digital micrometer with a diameter of 10 measuring heads

The measurement method is simple, direct, easy to operate, and suitable for beginners. The overall design is compact and exquisite, with a high-end and atmospheric appearance. It occupies a small space and is easy to store.

Widely applicable for measuring the cross ball distance of various types of gears, its worktable is made of stainless steel material, with high flatness, fine processing, high hardness, and high wear resistance. The high-precision probe system and numerous technological advantages ensure excellent accuracy and dynamic performance of the system. The high rigidity structure improves the system's anti-interference performance and long-term stability to the environment.

·Gauge180-45°

Before measuring the workpiece, it is necessary to calibrate the accuracy of the measuring instrument. The distance between the two measuring heads should be adjusted within the measurement range of the corresponding workpiece by manually controlling the measuring head control handle. The force measuring head adjustment handle should be manually moved to place the workpiece between the two measuring heads. Release the handle to make the measuring head contact the measured surface, reset or preset the display data, and complete the calibration.

The calibration process:

1. Select a suitable cross ball distance measuring head based on the size of the standard gear being tested, and install the measuring head using a specialized tool. Manually adjust the control handle of the left measuring head → tighten the knob → place the standard gear → tighten the bolt to fix the left measuring head. Because the right measuring head is automatically adjusted, the current state is that the standard part has already made contact with two measuring heads. Adjust the position of the standard part → zero the meter to complete calibration.

Remove the standard part and place the measured workpiece on the measuring platform using the same method as described above. After the measuring head contacts the measured surface, the display can show the measurement data of the workpiece or the difference with the standard part, completing the measurement. Note that the knob and probe on the left side cannot be moved during the measurement process.When changing the type of tested component, the above calibration needs to be repeated-The process of measurement.

Product accessories: ① Standard configurationφ10Measuring head

② Dial gauge/Dial indicator/Digital display meter optional

③ Standard parts