The fully automatic dehydrator is suitable for central kitchens, group meals, enterprises, military units, government offices, school canteens, vegetable and side dish centers, vegetable and agricultural product processing plants, food processing plants, and other places. This machine is made of 304 stainless steel and imported from Taiwan. It is fully automated, with a luxurious appearance, thorough dehydration, and does not damage vegetables. It is time-saving, labor-saving, convenient, and fast. Stability of fully automatic dewatering machine: During operation, there are eight springs supporting the machine underneath, which can maintain the stability of the machine during dewatering without noise. The machine has low noise during operation, breaking the huge noise of industrial dewatering machines currently on the market. Hygiene without dead corners, the casing can be easily disassembled and rotated 360 degrees without dead corners, making it easy to clean. The difference between basket dehydration and convenient feeding is that it is more conducive to protecting the raw materials compared to traditional bag dehydration. The dehydration process can adjust the speed and time, suitable for different dish requirements and different speed requirements. The appropriate height of the machine and basket can reduce handling fatigue during operation. The uniquely designed top cover of the vegetable basket ensures that materials will not splash outwards, causing waste and meeting the needs of a wide range of users.

Structural composition
This machine consists of a stainless steel dewatering tank, stainless steel frame, stainless steel slag basket, imported motor and bearings, variable frequency speed regulation device, drainage device, etc.

Working principle
Machine working principle: For vegetable and food processing, with reasonable rotation speed, no damage to material surface, safe and reliable, easy operation, low noise, the fully automatic dehydrator adopts a vertical stainless steel rotating structure. During dehydration, the centrifugal clutch drives the main shaft to gradually start, making the start smooth and with minimal vibration. With the help of centrifugal force after the drum rotates, the liquid on the surface of the material is thrown out, thereby achieving the purpose of dehydration. The interior is basket style dehydration, which is convenient for material feeding, has good dehydration effect, preserves quality and color, and does not lose its original flavor.

1. The installation position of the fully automatic dehydrator should be chosen at the angle between the two walls as much as possible to save space. At the same time, the motor should be placed at the angle position, so that water will not drip onto the vegetable dehydration motor when loading and unloading vegetables. 2. Before use, be sure to lock the casters to prevent malfunctions during machine operation. 3. Check if any parts of the machine have been damaged during transportation. 4. Check for foreign objects in the basket and rotating cage and clean them thoroughly to prevent damage to the machine during operation. 5. When using a vegetable dehydrator, use a permeable cloth bag to pack the vegetables and then put them into the vegetable permeable machine. This not only provides better protection for the vegetables, but also makes loading and unloading very convenient, with short material changing time, which can save a lot of time. 6. Before using the dehydrator, the timer can be automatically adjusted to set the dehydration time. Attention: The installation and wiring of this device should be carried out by qualified and skilled technicians.

7. Confirm that the power supply voltage matches the voltage used by the device. 8. Extend the power cord, reliably ground the wire core with a grounding symbol, and connect the other two wire cores to the full stage disconnect large distance power switch respectively; The power cord and the incoming and outgoing parts of the machine should be fixed and sealed to prevent water and electricity leakage. 9. Check the photoelectric control probe located at the rear of the hood. The correct position is aligned with the through hole of the follow-up disk on the left side of the hood hinge, checked for accuracy, closed the power switch, and conducted a no-load test run on the hood. Only when all parts are normal can the machine be tested. 10. Open the hood; Close the external power switch. 11. Load the rated materials into the sieve basket, and the materials should be evenly distributed without any obvious deviation or accumulation. 12. Place the basket inside the inner rotating cage, close the cover, and the machine will automatically run for one cycle, then automatically brake and stop. 13. After the machine completes its work, turn off the power.

1. Does the operating speed of the cage not match the adjustment speed?

Stop the machine and check if the materials in the basket are overweight, and remove a large amount of materials.

2. Does the machine experience severe vibration during operation?

Check if the material distribution is uneven and uneven, open the lid, and spread the material evenly.

3. If the rotating cage stops or does not rotate during operation?

Check if the synchronous belt is too loose or worn, and adjust the motor frame bolts.