Fluorine lined pipeline

The factors that directly affect the service life and performance stability of fluorine lined pipelines after years of practical use are temperature, pressure, medium, etc. High quality materials and advanced manufacturing processes are the quality assurance for PTFE lining products.

The company adheres to the principle of“Quality first, reputation first, service first”Our aim is to sincerely serve our customers and warmly welcome new and old friends from all walks of life to visit, guide, and negotiate with our company.
Since the introduction and research of integral molded polytetrafluoroethylene lining technology, our company has successfully produced integral molded lining products through years of unremitting efforts by engineering and technical personnel. Its characteristics are as follows:
　　1High operating temperature: Under strong corrosive medium conditions, it can meet the operating temperature range-60℃～200℃Within this temperature range (except for molten alkali metals, elemental fluorine, and aromatic hydrocarbons), all chemical media can be satisfied.
　　2Vacuum resistance: in-60℃～150℃Within the scope, it can be used under vacuum conditions. In chemical production, local vacuum conditions are often caused by cooling, vertical discharge, and asynchronous operation of pumps and valves.
　　3High pressure resistance: within the temperature range of use, it can withstand up to3MpaThe use of pressure.
　 4Anti permeability: High quality resin is selected and processed into high-density, sufficiently thick material through advanced lining technologyPTFEThe lining layer gives the product superior impermeability.
　　5The overall molding and sintering process lining solves the problem of steel-The challenge of fluorine cold and hot expansion is to achieve synchronous expansion and contraction.
　　6Standardized size configuration is adopted, especially for the pipes and fittings used in chemical pipelines, which have strong interchangeability, providing great convenience for installation and spare parts.

The product design complies with domestic and international standards such as HG, GB, DIN, ANSI, JIS, etc.

(1) Manufacturing range: DN25~DN400mm.

(2) Applicable working temperature: -50 ℃ -200 ℃.

(3) Allow negative pressure Dn ≤ 250 ℃ to be -0.09Mpa