1. Product Overview

Correctly installing and fixing is an important condition for the normal operation and proper functioning of the accumulator. When fixing the accumulator, the shell or joint should not be subjected to external pressure, especially for accumulators with strong vibration, horizontal installation, and a capacity of 1 liter. Fixed components must be used. The complete set of accumulator installation components generally consists of rear wall panels, clamps, brackets, rubber washers, etc., used to fix the accumulator and prevent dangerous vibrations. Fixed components are used for simple and safe fixation, regardless of installation position and usage location. It should be noted that fixed components are designed for static applications, and if they are to be used in a dynamic state, specially designed clamps should be provided as required.

　　2. Model Description

NXQ _ L ※ _ ※ _ ※

① ②③④

① Name code: Fixed component of accumulator

② Nominal capacity: 1-100L

③ The diameter of the accumulator is between Φ 114 and Φ 299

④ Number of clamps: A 1 B 2

　　3. External structure

　　4. Technical parameters

　　5. Ordering instructions

① When placing an order, the full name of the model code must be specified, such as: accumulator capacity of 40L, diameter of Φ 210 clamp 2 accumulator fixing components: NXQ-L40-219-B;

② If there are special requirements for the fixed components of the accumulator, please consult with our company;

③ Our company reserves the right to make design changes without prior notice.