Product Introduction

This dust collector is suitable for purifying gases in casting workshops, especially in situations with high dust content, high gas temperature, and high purification requirements, such as sand cleaning and sand treatment departments. Any hydrophilic dust can be used.

During work, dusty air enters the body from the horizontal direction of the air inlet for calming, and large particles of dust are deposited. Then the air flows towards both sides through the nozzleIn the nozzle, the dusty air is fully mixed with water to form a water curtain at the nozzle outlet, covering the cross-section of the nozzle outlet. Under these effects, relatively small dust particles are captured, purifying the air. The water droplets carried by purifying the air are blocked by the water blocking plate. The water in the box is constantly recycled, with only evaporation loss, so it consumes very little water during operation. Inserting the return pipe into the water reduces water agitation, which is beneficial for dust settling and can maintain high dust removal efficiency for a longer period of time.