Enhanced Open Flash Point Tester for the '7 Series' of the ISO 7000/2Setaflash
The enhanced open flash point gauge of the Elgar 7000/2 Setaflash '7 series overcomes the disadvantage of other flash point gauges having long cooling times, greatly expanding the applicability of the instrument.
Customers are required to have cooling water when using the Enhanced Open Flash Point Tester with the ISO 7000/2 Setaflash '7 Series'. To achieve a temperature of -30 ℃ (-22 ℉), the cold water must be at least 0.6 liters.
Technical parameters of the Enhanced Open Flash Point Tester for the Elg 7000/2 Setaflash '7 Series:
|
Elcometer7000/1 |
Jig 7000/2 and Jig 7000/3 |
temperature range |
The ambient temperature reaches 300 ℃ (572 ℉) |
-30 ℃ to 100 ℃ (-22 ℉ to 212 ℉) |
Test mode |
Time limited heating and speed limited heating |
|
Test duration, ramp mode |
1 minute below 100 ℃ (212 ℉), 2 minutes above 100 ℃ (212 ℉), or set by the user to 1-99 minutes |
The standard is 1 minute, or set by the user to 1-99 minutes |
computer interface |
RS232C |
|
Voltage range |
110/120V and 220/240V, 50-/60Hz (convertible) |
|
power |
200W (large) |
|
Dimensions (height X width X length) |
19X31X25cm(7.48X12.20X9.84″) |
21X49X30cm(8.27X19.29X11.81″) |
weight |
6.1kg (13.5 pounds) |
11.2kg (24.7 pounds) |
Specification parameters of the Enhanced Open Flash Point Tester for the Elg 7000/2 Setaflash '7 Series:
model |
describe |
Part number |
||
UK240V |
EUR220V |
US220V |
||
Elcometer7000/1 |
The ISO 7000/1Setaflash 7 series has an ambient temperature of up to 300 ℃ (572 ℉) |
K0UK7000M001 |
K0UK7000M001 |
K0UK7000M001 |
Elcometer7000/2 |
Enhanced version of the ISO 7000/2Setaflash 7 series -30 ℃ to 100 ℃ (-22 ℉ to 212 ℉) |
K0UK7000M002 |
K0UK7000M002 |
K0UK7000M002 |
Elcometer7000/3 |
Enhanced "Dedicated" Type for the ISO 7000/2Setaflash 7 Series |
K0UK7000M003 |
K0UK7000M003 |
K0UK7000M003 |
Order number: LR-100235