VIP member
Electronic Load Pulling Machine
ST-D300 Carrier Tape Pulling Machine Product Usage: The electronic carrier tape pulling machine is developed and designed for carrier tape peeling tes
Product details
ST-D300 Load Pulling Machine
Product Usage:
The electronic carrier tape tension machine is developed and designed for carrier tape peeling test, used for testing the peeling force of the cover tape on the carrier tape. Through the tension meter and its transmission part, combined with software, the peeling force of each position on the cover tape of a certain length of carrier tape is generated into a curve of peeling force and displacement, and the test results are judged. The electronic carrier tape tension machine is controlled by a microcomputer chip and can be used for testing the tensile and peeling force of materialsFull computer operation, automatic reset function, can output test graphics and table data as the basis for material testing when connected to a computer.
Compliant with standards:
EIA-418
Test software description:
The measurement and control system of the electronic belt tension testing machine is designed specifically for microcomputer electronic universal testing machines, microcomputer hydraulic universal testing machines, and microcomputer press machines. Can conduct tensile, compressive, bending, shear, tear, and peel tests. useCollect, store, process, and print test results using a PC and interface board. Parameters such as computable force, yield force, average peel force, deformation, yield point, elastic modulus, etc; Capable of curve processing, multi-sensor support, graphical interface, flexible data processing, and MS-ACCESS 2003 database support, making the system more powerful.
measurement and control softwareuseVisual Studio. Net development, supporting Windows XP/Win7 operating systems;
Support switching between multiple languages and automatic translation of database field display names for experimental data;
support3 types: SI international standard units, kg cm units, Lb Inch imperial units, 6 commonly used unit systems: N-mm MPa, kN mm MPa, gf cm kgf/cm2、kgf-cm-kgf/cm2、Lb-Inch-kpsi、kP-Inch-kpsi, Easy switching of units. Meet the usage standards of different regions.
The software adopts permission hierarchical management: tester level permission, test management permission, and testing machine manufacturer permission, which balances the convenience and security of use.
Technical parameters:
Machine model |
ST-D300 |
capacity selection |
1kg, 2kg, 5kg (choose one group) |
control mode |
Fully computer-controlled |
The test results show that |
Maximum peeling force, minimum peeling force, average peeling force, upper limit value, lower limit value, CPK value, standard deviation, root mean square deviation |
Peel angle |
165-180 degrees |
Product width |
0-120mm |
Force resolution |
0.01g |
Unit of Strength |
N、kN、gf、kgf、lbf、kP) |
Length unit |
mm、cm、Inch |
stress unit |
Pa、Kpa、Mpa、 |
Power resolution |
1/500,000 |
measurement accuracy |
± 0.5% |
test speed |
1-500mm/min can be adjusted freely |
Effective stroke |
400mm |
test space |
120mm |
Shutdown mode |
Upper and lower limit safety settings, specimen breakpoint sensing |
Result output |
Computer Output |
Machine power |
Stepper motor+stepper drive |
Machine power |
420W |
Machine size |
860mm（W）×300mm（D）×250mm（H） |
Use power supply |
220V 50Hz |
Standard configuration |
One set of fixtures, one power cord, one manual, and one computer software |
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-