Product Name: Electromagnetic MaterialCold and hot shock test chamber

Please select the product model suitable for your company based on the following table and parameter conditions. If there is no suitable model, we can also provide customized solutions according to your company's requirements.

Electromagnetic materialsCommon faults of cold and hot shock test box:

▲、If the low temperature does not meet the experimental indicators, observe whether the temperature changes slowly or tends to rise after reaching a certain value. The former should be checked to see if the working room is dried before conducting the low temperature experiment, so that the working room is connected and dry, and then the experimental samples are placed in the working room before conducting the experiment. Check if there are too many experimental samples arranged in the working room, so that the air inside the working room cannot circulate sufficiently. If the environment is not identical, professional manufacturers can be hired for repairs.High and low temperature impact test chamberIt consists of a box, an air circulation system, a refrigeration system, and a heating system.

▲、in additionThe reason may also be due to poor environmental temperature, and the manufacturer has proposed an ideal temperature5-28Degree（24The hourly average temperature is24The humidity is around95%Left or right is sufficient, and any fine instrument needs to have a well arranged factory site to ensure that the instrument can perform its ideal function. Ensure the service life of the product. This maintenance tip should be known by any laboratory manager or rigid operator.

▲、Electromagnetic material thermal shock test boxTaiwan refers to electromagnetic material cold and hot shock machines, which are used in industries such as electronic and electrical components, automation parts, communication components, automotive parts, metals, chemical materials, plastics, as well as defense industry, aerospace, and military industryBGA、PCBBase plate, electricity Sub chipICPhysical changes of semiconductor ceramic magnets and polymer materials,Test the material's repeated resistance to high and low temperatures, as well as the product's resistance to heat The chemical changes or physical damage caused by expansion and contraction can confirm the quality of the product,From precisionICAll components of heavy machinery require it The Ideal Testing Tool.

Electromagnetic materialsCold and hot shock test chamberMeet the standards:

▲、GB/T2423.1-2001Low temperature test method;

▲、GB/T2423.2-2001High temperature test method;

▲、GB/T2423.22-1989Temperature change testN；

▲、National Army StandardGJB150.3-86；

▲、National Army StandardGJB150.4-86；

▲、National Army StandardGJB150.5-86；

▲、GJB150.5-86Temperature shock test;

▲、GJB360.7-87Temperature shock test;

▲、GJB367.2-87 405Temperature shock test.

▲、SJ/T10187-91Y73Series Temperature Change Test Chamber - One Box Type

▲、SJ/T10186-91Y73Series Temperature Change Test Chamber - Two Box Type