industry

The chemical industry consumes too much energy, but the electrification rate of factory equipment is low, so there is a large market space for electrification.

Customer Demand

The maintenance and handling of (chemical) heat medium oil and salt solution is not easy.

The heat medium oil pipes in the (food) factory are not clean.

Developed an electric reaction tank that does not require heat medium oil

Applications

Chemical plants · Petrochemicals, resins, synthetic fibers, coatings, adhesives

Food factory... Health food (functional food, fatty acids, etc.)

chemical plant

Target Process

heating

distillation

melt

Synthesis of high boiling point substances (pesticides, lubricants, etc.) and functional foods (glycerol, etc.)

Characteristics of heat medium boilers

High temperature (pump pressure required for circulation) can be obtained under normal pressure.

Water generates pressure above 100 ℃, and the pressure rapidly increases, for example, it is about 3.92MPa at 250 ℃ and about 14.7MPa at 340 ℃.

Therefore, the equipment must be high-pressure equipment and require strict safety devices and water treatment, but the heat medium heater does not require strict high-pressure equipment.

Operating costs will be reduced

Circulating the heat medium oil in a sealed cycle, indirectly using it, so there is no loss due to leakage, flash evaporation discharge, drainage, etc.

Don't worry, freezing and water treatment are unnecessary.

Since no water is used, there is no need to worry about freezing, and there is no need to continuously inject water treatment equipment and cleaning agents.

Prevent uneven temperature and ensure even heating.

Due to the use of heat medium oil in the liquid phase, it is advantageous to have a small pipe diameter and almost no temperature drop even in long-distance pipelines.

In addition, IH heaters can be used to quickly raise temperatures and heat up to high temperature ranges.

Accurate temperature control can be achieved.

Temperature and heat can be freely controlled, and precise temperature control can be easily achieved.