VIP member
Product details
Structural characteristics of aging electricity meter room
The house is assembled with double-sided color steel plates and specialized aluminum alloy profiles, with five/six sided insulation.
There are various insulation materials to choose from.
Test a set of doors (single or double open→); Designated by the customer.
Equipped with a glass observation window with a size of 35cm× 45cm(W×H)。
aging roomcontrol system
Adopting the Yamatake/SUNTOW series controllers imported from Japan.
It can directly display the temperature curve.
The control mode is PID (proportional integral derivative) automatic calculation. PID control is simple and easy to understand, and does not require precise system models or other prerequisites for use.
The temperature sensor adopts DIN PT-100Ω (Platinum induction).
Heating system
Adopting high-efficiency armored stainless steel electric heating tubes imported from Japan.
The heating system adopts hot air circulation heating method, with uniform temperature distribution, completely independent system, and does not affect the control circuit.
The temperature control output power is calculated by a microcomputer, and the heating power is automatically controlled according to the size of the internal load to achieve high-precision and high-efficiency electricity efficiency, which is more environmentally friendly and energy-saving.
Exhaust system(Optional→ Mainly targeting products with high heat generation
A set of exhaust system.
Meet the temperature balance when the aging room test product generates excessive heat.
When the aging indoor temperature exceeds the limit, the exhaust system is turned on to achieve the effect of balancing the indoor temperature.
Compliant with standards
GB/T2423.2-2008, GB50054-95, GB5002S2-95, GB50169-92, GB50243-2002, etc
|
Equipment model |
EWR-10P-A |
EWR-30P-A |
EWR-75P-A |
EWR-100P-A |
|
Working Size |
2000x2000x2500 |
3000x4000x2500 |
5000x6000x2500 |
5500x7500x2500 |
|
Note: Customization can be made according to customer requirements for size and temperature control range to meet their needs. | ||||
|
temperature range |
RT～55℃、65℃、75℃、85℃、100℃、120℃selectable |
|||
|
Internal material |
Galvanized color steel plate orSUS#304Stainless steel plate |
|||
|
External material |
Galvanized color steel plate orSECCHigh and low temperature resistant steel plate+powder baking paint |
|||
|
Thermal insulation material |
Polyurethane, rock wool (selected according to different temperatures) |
|||
|
Insulation thickness |
50mm；75mm；100mm；150mm |
|||
|
Analysis accuracy |
0.1℃perhaps0.01℃ |
|||
|
Control accuracy |
± one℃ |
|||
|
Temperature deviation |
± three℃ |
|||
|
fluctuation |
± two℃ |
|||
|
Heating time |
Average 1-5 ℃/minute |
|||
|
Cooling time |
10~60minute |
|||
|
Series noise |
≦65decibel |
|||
|
control system |
Programmable:LCDColor LCD controllerperhapsStandard type:LEDDigital display controller |
|||
|
Heating system |
Specially designed high-speed electric heater |
|||
|
circulatory system |
Specially designed low noise,Multi wing circulating air system |
|||
|
Safety device |
Leakage and power-off protection,Load protection,over temperature protection,Fan overheat protection,Sound and light alarm, etc |
|||
|
Other accessories |
Glass observation window, test hole, smoke alarm, indoor lighting, temperature recorder (optional) |
|||
|
System power supply |
AC 380(± 10%)V，50HZ± 0.5HZ, three-phase four wire+Protect the ground wire |
|||
|
Meet standards |
Meet standardsGB/T2423.3Environmental Testing for Electrical and Electronic ProductstestCaHigh temperature test method |
|||
|
National Free Technical Service Hotline:400­ -618-5505 | ||||
|
Partial cases: | ||||
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-