The dust collector of the mining crushing system is mainly composed of upper and lower boxes, ash hoppers, ash discharge devices, filtration devices, blowing devices, induced draft fans and other main components. It has the advantages of large dust treatment, good purification effect, reliable operation, saving installation space, and simple daily maintenance. It is used in conjunction with hammer crushers, jaw crushers, and impact crushers.

The dust collector of the mining crushing system is used in the crushing system of the mining plant to solve the serious problem of excessive dust pollution during the crushing, separation, and transportation of ores by machines. The dust collector of the crusher is equipped with a dust collection device at the dust point, which sucks the dust into the dust collector box of the crusher through negative pressure for purification treatment, and separates the dust in the dust from clean air.

The dust collector of the mining crushing system uses a centrifugal fan to generate a negative pressure zone at the dust sealing cover, and sucks the dust into the dust removal equipment. The pulse bag dust collector is equipped with a dust removal bag, and when the dust containing gas passes through the bag, the dust is blocked and separated. The purified gas is then discharged through the fan. The dust on the surface of the filter bag is blown off by an electromagnetic pulse valve, and the compressed air blowing is automatically controlled by PLC without the need for human control, which is one of its major features. Pulse bag dust collectors are not only used for crushing, but also for dust control in various industries, achieving good dust removal effects and meeting design requirements. They are currently the ideal dust removal equipment.

The main characteristics of the dust collector in the mining crushing system are:

1. The advantages of various types of dust collectors, such as back blowing and pulse spraying in the collection room, include a large air volume per unit volume, low system resistance, and high dust removal efficiency;

2. It can directly handle dust with a concentration of up to 200g/nm3, and other emissions with a concentration of less than 50mg/nm3 after treatment. It can also meet stricter emission requirements according to the special needs of users;

3. Used for dust removal in coal powder systems, dust removal bags and explosion-proof measures are taken according to the properties of coal powder.