|
Metallographic equipment:YMP-1/YMP-2B/MY-1/QG-2/QG-3A……………………………
|
YMP-1Single disc metallographic sample pre grinding machine
In the preparation process of metallographic specimens, polishing and buffing of the specimens are important procedures. The YMP-1 grinding and polishing machine of this machine was developed and designed through various market research and extensive listening to the opinions and requirements of operators and users. The collection tray and cover of this machine are made of fiberglass and have a novel and beautiful appearance, which is a relatively new product. This machine has three functions in one, and when in use, it only needs to replace the grinding disc or discard and grind discs to complete various processes such as rough grinding, fine grinding, dry grinding, wet grinding, grinding and polishing of various samples. Suitable for sample preparation of various materials. The diameter of the grinding, polishing, and grinding discs of this machine is larger than that of similar domestic products. The independent operation of grinding, polishing, and grinding discs allows for stepless speed regulation, making it an excellent equipment for preparing metallographic specimens.Parameters
Sandpaper diameter: 230mm Grinding disc diameter: 250mm
Dropping diameter: 220mm Grinding diameter: 220mm
Speed: 50-1400 r/min
Motor: YSD variable frequency motor, 0.55KW, three-phase 220V, 0-180Hz
External dimensions: 760×420×340mm
Net weight: 52Kg
|
|
|
|
YMP-2BMetallographic Sample Grinding and Polishing Machine
In the process of preparing metallographic specimens, polishing and grinding are two very important processes. Usually, two types of equipment, metallographic specimen pre grinding machine and metallographic specimen polishing machine, are used to complete them. In order to meet the needs of China's industrial and technological development and meet the user's requirements, our company has newly designed and manufactured the YMP-2B metallographic specimen polishing machine. The machine has a novel and beautiful appearance, and the collection tray and cover are made of fiberglass as a whole. This machine is durable and easy to maintain. When in use, only the grinding disc or throwing disc needs to be replaced to complete various processes such as rough grinding, fine grinding, dry grinding, wet grinding, and polishing of various samples. To meet the preparation requirements of different samples, the diameter of the grinding and throwing disc of this machine is larger than that of similar domestic products. There are more options for different line speeds on the working surface, which can increase the effective working surface by 20-30%, improve the grinding and polishing quality of the sample and the preparation efficiency of the sample. The machine rotates smoothly and has low noise, making it an ideal and well-equipped metallographic sample preparation equipment.
Main parameters:
Grinding disc diameter: 250mm Sandpaper diameter: 230mm Throwing disc diameter: 220mm
Speed: 500r/min，1000r/min
Motor: YS7124，0.55KW，380V，50Hz
External dimensions: 710×650×370mm
Net weight: 80Kg |
|
|
MY-1Spectral sand belt grinding prototype
During the sample preparation process of the MY-1 spectral sanding belt grinding machine, the smoothing of the sample is an important step before spectral measurement. The MY-1 spectral sand belt grinding machine is a fully enclosed stainless steel sand belt machine. There is a water tank under the sanding belt, which carries the dirt into the water during the grinding process, so that there is no dirt in the air during the work. The MY-1 spectral sanding belt grinding prototype is a new product developed through market research and collection of usage data from various sources, gathering the strengths of different companies.
The working principle of MY-1 spectral sand belt grinding prototype. A large drum with rubber is installed on the motor spindle to drive a driven small drum connected by a sand belt. Under the drive of the motor, the sand belt moves in a straight line. The sample can be ground by placing it on the sand belt to meet the requirements of spectral measurement for the sample.
Main parameters:
Center distance of drum: 310mm
Belt width: 100mm, length: 920mm
Speed: 1400r/min, 480m/min
Motor: Y801-4,0.55KW,380V,50Hz
Dimensions: 470 × 480 × 230mm
Net weight: 55Kg |
|
|
|
QG-2Type lithofacies sample cutting machine
In the process of preparing metallographic specimens, cutting the specimen material is an important step in specimen preparation. The QG-2 cutting machine is suitable for general lithological materials. To ensure that samples can be cut in an absolutely safe state, this machine adopts a fully enclosed double shell structure and a quick clamping device, and has a cooling water tank that can use pre prepared coolant for circulation. In order to extend the service life and facilitate operation, maintenance, and upkeep of the equipment, the main components of the machine, such as the cover, grinding wheel shaft sleeve, jaw, and worktable, are made of stainless steel material, making it a better equipment for cutting samples.
Main parameters:
Larger cutting section: 65 × 65mm
Speed: 1400r/min
Diamond cutting blade specification: 250 × 1 × 32mm
Motor: AS8034， 1.1KW， 380V，
50HZ
Dimensions: 490 × 600 × 330mm
|
|
|
Net weight: 45KGQG-3A
Metallographic Sample Cutting Machine
This machine is used for cutting general metallographic and lithological sample materials. The machine is equipped with cooling channels and switches that can be used to introduce pre configured coolant during cutting to remove the heat generated during cutting, avoiding overheating of the sample and burning of the tissue. This machine is easy to operate, safe and reliable, and is one of the commonly used equipment for laboratory sample preparation.
The grinding wheel spindle is installed in the rocker arm bearing seat and obtains power for the feed motion of the grinding wheel cutting through the transmission of the triangular belt pulley. The speed of the cutting feed is determined by the speed of the manual rocker arm swing. Above the workbench is a quick clamping mechanism for the sample, and the pressure rod can move up and down freely for easy and flexible clamping. The pressure rod is hollow and filled with coolant, and below the pressure block is a working jaw with a "V" groove for clamping the sample. The workbench is equipped with a transparent organic glass protective cover for observation and protection during cutting. The inlet and outlet water channels and coolant switches inside the machine can be adjusted or closed according to cutting needs, and the flow rate of coolant can be adjusted or closed as needed.
The cooling water tank is designed specifically for storing coolant, and the pre configured coolant can be recycled. It is necessary to choose a coolant with good lubricity for the configuration of the coolant. Do not use regular tap water as a coolant.
Diamond grinding wheels must be used for cutting sample materials such as rocks and ceramics. (Diamond grinding wheel blades require special ordering).
Main parameters:
Larger cutting width: 60mm
Large cutting height: 80mm
Larger cutting surface diameter: Φ50mm
Grinding wheel specification: 250 × 2.0 × 32mm
Motor: y90L-2 2.2kw
Dimensions: 580 × 560 × 680mm
|
|
|
|
