Winding specification: (L * W * H) mm 1200 * 1200 * 1800

Conveyor height: 500mm (350-700mm)

Cantilever speed: 25rpm

Membrane frame mechanism: pre stretched membrane frame

Power voltage: 3.5KW, 220/380V

Dimensions: 3800X2100X3600

Packaging material: wrapping film

Machine weight: 1380kg

The rocker arm dual head winding machine, as the name suggests, is a dual arm winding machine with two cantilevers and two motors. The working principle of the rocker arm winding machine is to keep the goods stationary, and the cantilever performs circular winding on the outside of the goods, which is suitable for large volume and heavy goods. The dual head rocker arm machine adds a cantilever arm on the basis of single arm winding, greatly improving work efficiency. The same winding requirements can save almost half of the time, making it a rare winding tool for many companies with high requirements for assembly line operations.

PLC programmable control, winding program optional, various parameters adjustable.

The photoelectric switch automatically senses the height of the goods.

Prominent flashing safety warning lights and emergency stop switches.

Pre stretching automatic film feeding mechanism.

Cantilever slow start, slow stop, automatic reset.

The top and bottom winding numbers are separately controlled.

Automatic and manual can be switched, requiring almost no daily maintenance.

The electrical and wiring devices of the entire machine are made of well-known domestic and foreign manufacturers' brands, and must all pass CE safety certification in order to be qualified

Supply to our company without any safety hazards. The whole machine adopts a multifunctional human-machine interface touch display system and PLC control, with a large display screen,

Real time display of device operation status; A powerful fault detection system that can display real-time fault information and guide maintenance personnel on how to troubleshoot

Fault.

Rocker arm system:

Cantilever variable frequency speed regulation, adjustable.

The cantilever automatically resets.

Cantilever safety touch automatic shutdown.

Cantilever quick loading and unloading method.

The cantilever can be folded for convenient transportation.

Cantilever integral slewing support structure.

Install an overall anti fall protection device on the cantilever to prevent it from falling off and falling to the ground.

Membrane rack system:

The membrane frame power pre stretching mechanism can achieve pre stretching up to 250%, reducing membrane consumption.

The rising and falling speed of the membrane rack can be adjusted separately.

Adjustable film delivery speed; Individual variable frequency AC motor control.

The top and bottom winding numbers are separately controlled.

The membrane system follow-up mechanism can be easily pulled.

The membrane frame is made of pure cast iron, lightweight and stable.

Choose wear-resistant rubber rollers for long service life.

Automatic film breaking system, automatic film clamping, film breaking, hot pressing, and gas synthesis.

The film frame system is a brand new patented pre stretched film frame, which saves at least 50% of packaging material costs compared to ordinary film frames;

The safety performance of the membrane frame is higher. The overall lifting and lowering of the membrane frame adopts a wheel type, with 8 nylon rollers built-in to guide sliding, increasing safety

The service life is more than 5 times longer than that of ordinary nylon U-shaped card type; This design is currently applying for a national utility model patent(Patent number:ZL 2014 2 0011227.1）；

The ends of the membrane frame that rise and fall are both equipped with dual limit protection to prevent major damage to the body itself in case of program errors.

Broken film system:

Use heating wire to break the film.

After the film is broken, a heat sealed fusion film tail is used without leaving a tail.

Before the film is broken, the clamping mechanism first pulls the wrapped film down by about 200mm to make the hot pressing point more secure and aesthetically pleasing.

Blowing device: When the packaging is started, the tail clamped by the film clamping mechanism will be released. At this time, the blowing device is activated to blow up the film tail, which can be used to

The wrapping film of the rotating packaging wraps around the tail without leaving any tail film.

When the wrapping film breaks or there is no film during the packaging process, an automatic shutdown alarm will be triggered.

；

；