Installation method
The ceiling mounted constant temperature and humidity machine comes with a built-in fan, which adopts a front return air and rear outlet air type Installation is relatively convenient, just connect the air duct, drainage pipe, power cord, etc. after the ceiling
operating control
The ceiling mounted constant temperature and humidity machine is controlled by a professional microcomputer. The control panel (box) can be installed on the wall under the ceiling for easy operation and observation. The crew can automatically start and stop according to the relative temperature and humidity set by the user
Operation protection
The fully automatic product operation has functions such as condition display, humidity display, and fault code display. The unit is equipped with compressor restart delay of three minutes protection, overload, short circuit, overheating, low pressure protection, etc.
Technical parameters of ceiling dehumidifier
Parameter (Unit) Model |
DJHF3D |
||
Dehumidification capacity |
L/D |
90 |
|
Humidification amount |
L/D |
24 |
|
Applicable indoor area |
m2 |
20-30 (with a floor height of 2.6m) |
|
power supply |
V |
220V~50 Hz |
|
input current |
A |
13.6 |
|
Rated input power |
K W |
3.0 |
|
Circulating air volume |
m3/h |
700 |
|
External residual pressure (internal static pressure) |
Pa |
38 |
|
Dimensions (L * W * H) |
mm |
Internal unit: 760 * 540 * 475 External unit: 830 * 320 * 545 |
|
Size of air inlet (outlet) |
mm |
∮250 |
|
Air outlet size |
mm |
∮200 |
|
Internal machine noise |
dB |
≤60 |
|
net weight |
Kg |
50 |
|
gross weight |
Kg |
58 |
|
Environmental temperature for use |
℃ |
5-38 (Start automated frost when ambient temperature is below 18 ℃) |
|
drainage method |
|
Flexible hose connection for continuous drainage |
Product and accessory diagram