The Dakota PVX ultrasonic thickness gauge from the United States can completely replace the PX-7 series ultrasonic thickness gauge. The PVX ultrasonic thickness gauge has all the functions of the PX-7 series ultrasonic thickness gauge and adds A/B scan display function, making it more widely applicable and with a larger measurement range.

• Adjustable square wave pulse generator for excellent resolution and penetration capability
• Measurement door setting function
• A-scan positive/negative detection display is used for thickness measurement, flaw detection, and corrosion pit detection
• B-scan display is used to show the cross-sectional shape of the tested material
• Adjustable display resolution
• Upper/lower limit sound and light alarm function
• The automatic gain control function is used to measure the thickness of the substrate without removing the coating/plating layer
• The high-speed scanning function can be used to quickly find the minimum value of wall thickness
• 12000 pages of large storage capacity data storage capacity (each page can store one thickness value and one waveform)
• 16 factory settings and 48 user settings, all of which users can select, edit, and save as other settings
• Multiple single crystal probes can be used (standard delay block probe, pen delay block probe, and contact probe)
• The automatic search function can automatically locate the measurement point and select appropriate display parameters to display the measured waveform on the screen
• Multiple display modes (RF waveform, A-scan positive/negative detection, B-scan, and large thickness values)
• It can exchange data with computers through software, making it convenient for users to print detection reports

volume

63.5X165X31.5mm

casing

Alloy shell

weight

382 grams (including battery)

keyboard

12 key touch button

probe

Single crystal probe (1-20MHz), LEMO 00 interface

Measurement method

Initial wave bottom wave method (used for measuring general thickness materials)
Interface wave bottom wave method (used for measuring thicker materials)
Bottom wave bottom wave method (used for measuring thin materials and penetrating coatings)

measuring range

1.27-25.4mm steel (interface wave bottom wave mode)
0.15-12.7mm steel (bottom wave bottom wave method)
1-254mm steel (initial wave bottom wave contact method)
2.54-76.2mm steel (bottom wave bottom wave contact method)

Sound speed range

1250m/s～9999m/s

Display Accuracy

0.01mm and 0.001mm are optional (for easy conversion between metric and imperial systems)

display

Equipped with backlit LCD display, with a visible range of 62X45.7mm (240X160 pixels) and large digital thickness value display (thickness value digital height can reach 10mm)

Alarm

Sound and light alarm

operation temperature

-10℃-60℃

Battery operating time

150 hours (3 No. 5 alkaline batteries) 100 hours (3 No. 5 nickel cadmium batteries)