DAKOTA The CMX DL+thickness gauge from the United States has all the functions of MVX, and also has the ability to simultaneously measure the thickness of metal substrates and surface non-metallic coatings.

• Measurement methods (only measuring substrate thickness, simultaneously measuring substrate and coating thickness, only measuring coating thickness)

• Display mode (digital display, B-scan display, A-scan display<cmx>only)

• Adjustable gain: ultra-low, low, medium, high, ultra-high

• The gain value can reach 110dB

• Automatic Gain Control (AGC)

• Time gain correction (TCG)

• Probe automatic recognition, automatic zeroing, and temperature compensation

• Display of maximum and minimum values

• Can store 64 user parameter settings

• High speed scanning (50 times/second)

• Pulse repetition frequency up to 140Hz

• B-scan display is used to show the cross-sectional shape of the tested material

• A-scan waveform display and RF display (CMX DL+)

• Differential measurement mode

• The high-speed scanning function can be used to quickly find the minimum value of wall thickness

• Upper/lower limit sound and light alarm function

• Data storage: capable of storing 21000 measured thickness values or 16000 measured thickness values and B-scan graphics and parameters

• It can exchange data with computers through software, making it convenient for users to print detection reports

keyboard

12 key button

measuring range

Interface wave bottom wave (P-E) mode: 0.63-508mm

Interface wave bottom wave (PETP) method with automatic temperature compensation: 0.63－508mm

Multi layer measurement (PECT) method: 0.63-508mm (substrate) 0.01-2.54mm (surface coating)

Penetration coating measurement (E-E) mode: 2.54-102mm (may vary depending on the coating)

Measurement of Coating (CT) Mode Only: 0.0127-2.54mm (may vary depending on the coating)

Display Accuracy

0.01mm (easy conversion between metric and imperial systems)

Sound speed range

1250－13995m/s

operation temperature

-10℃—60℃

probe Type

1-10MHz twin crystal probe

Probe interface

LEMO“00”， Can use probes from MX and MMX series thickness gauges

communication interface

RS232 interface (equipped with USB to RS232 connector)

Battery operating time

150 hours (3 No. 5 alkaline batteries) 100 hours (3 No. 5 nickel cadmium batteries)

Power saving function

Automatically shut down after 5 minutes without any operation

display

62X45.7mm (240 X 160 pixels), large digital thickness value display (thickness value digital height can reach 17.78mm)

outline dimension

63.5X165X31.5 mm

weight

382 g

Display Accuracy

Alloy shell