A comprehensive solution

A negative electrode plate solution

pasteboard

REM Polyhesive ™ II Patient Circuit Electrode Plate

Advanced Patient Monitoring Safety: Our REM ™ The contact quality monitoring system can monitor the patient pad interface throughout the entire process. If impedance rise or poor contact between the pad and the patient is detected upon returning to the electrode, an alarm will be triggered and the electrosurgical generator will be disabled. Combining our REM Polyhesive ™ II patients return electrodes, which can ensure safer treatment for patientselectrosurgeryoperation.

Polyhesive ™ hydrogel

Composed of over 70% water, it effectively adheres to the skin. And provide uniform contact throughout the entire pad surface area - without scratching the patient. The thickness is between 0.078 cm and 0.155 cm, which helps to reduce the possibility of exposed foil "hotspots" on the pad surface.

Enhance adhesion

The acrylic adhesive tape around improves the contact quality between the electrode and the patient.

Flexible power

Closed cell foam backing conforms to any patient profile to prevent back electrode tearing.

size

Large size (21.25 square inches/37 cm)²）Polyhesive with thick layers (0.050 in./0.127 cm) ™ The hydrogel can disperse the current over a large area to minimize heat generation.

Negative electrode size

When the heat generated over time cannot be safely dissipated through the size or conductivity of the patient return electrode (PRE), a return electrode burn occurs. That's why returning electrode size is important for patient safety.

E7507 REM Polyhesive ™ IInegative plateThe design and dimensions take into account patient safety.

E7507

137 cm²(Effective area)

E7510 Infant REM Polyhesive ™ The effective area of the negative electrode plate is approximately 75 cm²Only applicable to patients with a maximum weight of 30 lbs.

E7510 75 cm²(Effective area)