
CS typehand pumpproduct overview
CS-20, CS-25, CS-32 serieshand pumpSuitable for pumping liquids such as fuel, lubricating oil, water, etc. It has the characteristics of small size, light weight, good self-priming performance, and easy installation and use. CS series produced by Kaimei Pump Industryhand pumpThe design is reasonable, the materials used are exquisite, the maintenance is simple, and important components have undergone anti-corrosion treatment, making it an ideal marine pump.
CS typehand pumpModel Meaning

CS typehand pumpperformance parameter
type name
|
CS-20Type pump
|
CS-25Type pump
|
CS-32Type pump
|
internet trafficm3/divide
|
0.02m3/divide
|
0.032m3/divide
|
0.04m3/divide
|
Discharge pressureMpa
|
0.25mPa
|
0.25mPa
|
0.25mPa
|
Vacuum suction heightm
|
5m(Water column)
|
5m(Water column)
|
5m(Water column)
|
Strokemm
|
70mm
|
70mm
|
90mm
|
Repeating times/divide
|
50order/divide
|
50order/divide
|
50order/divide
|
Pump cylinder diametermm
|
φ65
|
φ75
|
φ88mm
|
Handle forcekg
|
≈18kg
|
≈230N
|
≈28kg
|
Inlet and outlet diametermm
|
φ20mm
|
φ25
|
φ32mm
|
weightkg
|
6kg/tower
|
8.5kg/tower
|
12kg/tower
|
CS typehand pumpInstallation size

type name
|
CS-20
|
CS-25
|
CS-32
|
CS-38
|
A
|
180
|
205
|
225
|
280
|
B
|
152
|
180
|
200
|
245
|
C
|
63
|
70
|
81
|
70
|
D
|
213
|
220
|
249
|
260
|
E
|
134
|
150
|
165
|
180
|
CS typehand pumpMain component materials
Another item name
|
material material
|
treetop accurate
|
pump body
|
ZL102
|
GB1173-74
|
cover
|
ZL102
|
GB1173-74
|
live fill in
|
ZL102
|
GB1173-74
|
Water tank sleeve
|
HT20-40
|
GB 976-67
|
valve
|
2cr13
|
GB1220-75
|
valve seat
|
H62
|
YB 553-71
|
axle
|
2cr13
|
GB1220-75
|
Linkage mechanism
|
2cr13
|
GB1220-75
|
HType water cylinder sleeve
|
H62
|
YB 553-71
|
Note:The CS series produced by our companyhand pumpThe Y-type and H-type are identical in structure and dimensions, with the H-type cylinder liner made of copper material to accommodate seawater and domestic water.
CS typehand pumpUsage and Maintenance
1. Before use, remove the oil drain screws on both sides of the cover and the upper end cover, inject an appropriate amount of lubricating oil, and shake the handle until it moves freely. 2. The handle should be shaken back and forth at the maximum angle during operation. A filter should be installed before the pump inlet to prevent dirt from entering the pump and affecting its efficiency, service life, or even damaging other components. 3. When installing the pump, it is necessary to check whether the valve located inside the upper cover of the pump is in the correct position, and shake the pump several times to see if there are any abnormalities. If any abnormalities are found, they can be exchanged with our factory. 4. The oil seal cycle of this series of pumps is six months. If it is left unused or stopped for a long time, it should be cleaned and resealed.
Kaimei Pump Industry Co., Ltdoil pumpSelection Notice
1hand pumpProduct name and model,hand pumpPipeline diameter,hand pumpUsing head (m),hand pumpMotor power (KW),hand pumpMotor speed (r/min),hand pumpVoltage [V],hand pumpThe suction range used (m),hand pumpName, specific gravity, viscosity, corrosiveness, and toxicity of the medium used 2、 If our company has already been selected by the design unithand pumpModel, please presshand pumpOrder the model directly from the marketing department of Kaimei Pump Industry Company. 3、 Please provide detailed product usage requirements as much as possible to ensure the correctness of our selection and improve the maximum efficiency of use. Thank you for visiting the website of Kaimei Pump Industry【http//www.kmb58.com】If you have any questions You can call our company's marketing department, and we will do everything with care.hand pump
Pay attention to details and quality, Kaimei water pump
|