The function of the bending machine is quite powerful, it can stretch and bend various materials, not only with good results, but also not easily deformed! Let's take a look at the specific function of the bending machine together! Bending machines can be divided into rotary table bending machines and double arm bending machines, as well as various types such as shower room bending machines, train roof beam bending machines, and elevator bending machines.
Bending machines, profile bending machines, arc bending machines, forging and stamping belong to plastic processing properties and are collectively referred to as forging. Forging is a commonly used forming method in mechanical manufacturing. Forging can eliminate the casting porosity and welding holes of metals, and the mechanical properties of forgings are generally better than those of castings of the same material. For important parts with high loads and severe working conditions in machinery, forgings are often used, except for simple shaped plates, profiles, or welded parts that can be rolled. The bending machine adopts full hydraulic control, which is easy to operate and has high production efficiency. Various steel pipes, square pipes, H-beams, I-beams, channel steels, angle irons, flat irons, and aluminum profiles with cross-sections below 500mm can be cold-formed. After bending, they have a curved shape, high precision, and stability.
The precautions to be taken before operating the bending machine include: it is strictly prohibited to replace the core shaft, change the angle, and adjust the speed during operation, and it is also not allowed to add oil or remove it. When bending steel bars, it is strictly prohibited to process steel bars beyond the diameter, number, and mechanical speed specified by the machinery. When bending high hardness or low-alloy steel bars, the diameter limit should be changed according to the mechanical nameplate regulations, and the corresponding core shaft should be replaced. It is strictly prohibited to stand within the working radius of bent steel bars and on the side of the machine that is not fixed. Bent semi-finished products should be neatly stacked, and the hooks should not face upwards. When reversing the turntable, it must be done after it has come to a complete stop. Complete homework, clean up the site, maintain machinery, and power off the lockbox.