
Product Introduction
A hygrometer, also known as a moisture meter or dew point meter, is used to measure the humidity of flue gas emissions from pollution sources and convert the wet flue gas concentration into dry flue gas concentration based on this. It can also be used for industrial online humidity monitoring. The CEMS-HMT-1000 humidity meter can be directly installed on the flue or chimney through a flange, and outputs humidity and temperature signals through 4-20mA or RS232.
Product advantages
Adopting imported sensors with high performance indicators and reliability;
The probe has a heat tracing function to prevent the sensor from being damaged by condensed water in the flue;
Digital processing with strong anti-interference ability.
Product parameters
Humidity range: 0-40% (VOL), 0-100% (VOL)
Temperature range: 0-180 ℃
Accuracy: ± 2% F.S
Response time:< 6s(T90)
Smoke temperature limit: < 180℃
Environmental temperature:- 10℃~+55℃
Humidity sensitive capacitor lifespan:>5 years
Output signal: 2 channels of 4-20mA (load 500 Ω) and 1 channel of RS232
Humidity alarm output: Two relay outputs
Power supply: 220VAC, 40W
case
Suitable for measuring humidity in media, it can be widely used for humidity measurement and control in printing and dyeing, steaming, drying, tobacco, wood, and paper industries; Humidity measurement and control in the fields of chemical, pharmaceutical, fiber, and textile industries; Humidity measurement and control in tobacco, vegetable, and food processing. At the same time, it can be used in conjunction with the company's CEMS system for monitoring smoke emissions and monitoring and control of flue gas desulfurization and dust removal projects