JR-1 multifunctionalBlood plasma analyzer

We have independently developed a new type of blood bank to meet the needs of hospitalsMulti functional slurry dissolving machineThe machine adopts digital display and computer temperature control, and can set the temperature arbitrarily according to different needs. The water temperature difference is not more than ± 1 ℃. It is equipped with an automatic swing system, which can automatically adjust the frequency, especially for melting plasma. Melting and swinging are carried out simultaneously, and it can be used after a few minutes of removal. Reduced the number of procedures, saved time for rescuing patients, and facilitated medical workers. It is an ideal supporting tool for blood banks.
1： JR-1 multifunctionalBlood plasma analyzer Main technical parameters and characteristics:
1: Temperature control 37 ℃± 1 ℃
2: Temperature control accuracy ± 0.5 ℃
3: Digital temperature display, microcomputer temperature control.
4: Heating power. ≤ 1000W
5: Thawing time, ≤ 10min
6: The maximum pulp volume is less than 8 bags (100-200ml)
7: There are 8 immovable stainless steel thawing blue pieces
8: Equipped with an automatic dual arm swing system that swings back and forth 60 times per minute or automatically adjusts the frequency.
2、 JR-1 multifunctionalprecautions
1: Normally set the water temperature, it can be turned on for a long time. When in use, turn on the swing switch, set the frequency, and it will automatically swing. After use, turn off the swing switch to save electricity and reduce mechanical wear.
2. Before use, be sure to add water to the water level line and avoid dry burning to protect the heating tube. As the startup time increases, the water in the water tank gradually evaporates. Please check the water level at any time (add water and replace it). Ensure that the machine is operating normally.
3. Set temperature: Press the SET button to set or view the temperature set point. Press the SET key once to start flashing the character, indicating that the instrument has entered the set state. Press the △ key to increase the set value, and press the △ or ▽ key to quickly change the data. Press the SET key again to return the instrument to normal working state. Once the temperature setting is complete, the heating indicator light will turn on.
4. Pre setting: Press the SET button for 3 seconds to enter the inner layer parameter setting state of the instrument* The parameter that appears and flashes is the advance amount that stops immediately. The advance amount parameter should be carefully adjusted to reduce temperature overshoot. When the instrument controls the heating output, it will cut off heating in advance. When the temperature drops below the advance amount, it will start heating again. The output (relay) will not work within the set value and advance amount range. This can reduce the number of relay actions and extend the service life of the relay. Example: If the set value is 50.0 ℃ and the advance amount is 0.5, the relay will release when the instrument control heats up to 49.5.0 ℃, and the relay will close again when the temperature drops to 50.0 ℃ -0.5 ℃=49.5 ℃. The larger the advance amount, the fewer times the relay will act, and if the advance amount is too large, it will reduce the control accuracy. After adjusting the advance parameter, press the SET button for 3 seconds to return the instrument to its working state. (Note: Pre setting is specifically set to prevent excessive temperature surge after heating stops, and generally does not require modification).