mechanical properties

1. Purpose:

The DSP-LGB04 series omnidirectional planetary ball mill can finely grind or mix solid particles, suspensions, and pastes with different particle sizes and materials using both dry and wet methods. If a vacuum ball milling jar is used, the sample can be ground and mixed in vacuum or inert gas. The DSP-LGB04 series all-round planetary ball mill is an essential equipment for mixing, fine grinding, new product development, and production of high-tech materials. It is widely used in fields such as geology, metallurgy, soil, building materials, chemical industry, light industry, medicine, electronics, ceramics, batteries, and environmental protection.

2. Working principle

The DSP-LGB04 series omnidirectional planetary ball mill is equipped with four ball milling tanks on a large plate. When the large plate rotates (revolves), the ball milling tanks rotate on their own orbits. The large plate and ball milling tanks can perform planetary motion while also flipping 360 ° in a three-dimensional space range, and can be manually set to run at any fixed point in any direction. The DSP-LGB04 series all-round planetary ball mill makes the ground materials more uniform and fine, and can solve the problems of sinking and sticking of some materials.

3. Technical parameters

1. Model (specification): Ball mill: DSP-LGB04

2. Can be equipped with ball milling jar: Capacity (single jar capacity, unit: milliliters): 50, 100.

3. Materials: stainless steel, agate, nylon, polyurethane, polytetrafluoroethylene, ceramics, etc

4. Type: Ordinary can, stainless steel vacuum can, stainless steel vacuum sleeve (used in conjunction with agate, nylon, ceramic and other ball milling cans for vacuuming). The volume of vacuum ball milling tanks shall not exceed 50 milliliters.

Large loading capacity per jar: three-quarters of the capacity of the ball milling jar (including grinding balls)

5. Feed particle size:< lmm

6. Discharge particle size: * as small as 0.1 μ m.

7. Rated speed: revolution (disk) 0-300 revolutions per minute, rotation (ball mill) 0-600 revolutions per minute.

8. Operation mode: The ball mill is controlled by a frequency converter and has five operation modes:

1. Unidirectional operation, intermittent shutdown;

2. Unidirectional operation, timed shutdown;

3. Alternating forward and reverse operation, timed shutdown;

4. Unidirectional interval operation, timed shutdown;

5. Alternating between forward and reverse operation, with timed shutdown.

9. Speed regulation method: Variable frequency speed regulation 0-60Hz, resolution 1Hz, local speed limit 0-50Hz.

10. Control mode: 0-50Hz (0-600 rpm) manual adjustment at any time, 1-999 minute timed operation, 1-300 minute timed forward and reverse rotation, 1-999 minute timed interval operation, 0-100

Restart and run again.

11. Net weight of this machine: 80 kg.

DSP-LGB04 series all-round planetary ball mill is a good choice for you!