This grinding machine can grind drill bits and taps with diameters ranging from 2mm to 40mm, with 1 to 12 teeth, and can be left-handed or right-handed.

The machine tool complies with the CE standards set by the European Union.

Including the following configurations:

1. High precision 6-jaw card head

2. A set of No.4 camshafts for regrinding right-handed drill bits with 1, 2, 3, 4, and 6 teeth

3. Mo style taper handle conversion sleeve MC1, MC2 and MC3

4. Vertical motor-driven grinding wheel spindle, used for grinding cracked drill tips and cross edges

5. Grinding wheel specification 200 × 25 × 32, particle size 60

6. Cup shaped grinding wheel with specifications of 125 × 13 × 20 is installed on the spindle for grinding the transverse edge

7. Motor with brake

8. Control panel, 24 control voltage

9. On the right side of the grinding wheel, there is a wheel corrector for adjusting the diameter of the grinding wheel

10. Diamond specification ct for grinding wheel dresser zero point five

11. Operation Manual for Halogen Lamp and Machine Tool