Wen Yi Optoelectronics ACH-VAR | Transmission Support As an adjustable collimating lens support, it is a two in one product: including a fixing device for positioning the collimating lens at different heights, supporting the placement of larger and thicker samples; And a bracket for placing samples for transmittance measurement.

As a bracket for the lens, this product features an anodized aluminum base and an adjustable fixed panel with 3/8-24 screw holes to accommodate the collimating lens (including two fiber optic collimating lenses). The panel can be adjusted, and the standard 200mm slide table can accommodate samples up to 150mm thick. The base has 1mm intervals on the scale, which can be used as a ruler for optical path. This product has a sample holder that can safely place the tested item between two fixed panels, with a maximum width of 150mm to accommodate a colorimetric dish.

This product has four fixed test holes of different heights. The heights of the four test holes from the bottom slider are 50mm, 80mm, 110mm, and 140mm, respectively; The standard configuration includes 2 collimating mirrors, and customers can change the position of the collimating mirrors according to their sample height after purchase.

ACH-VAR transmission bracket
Diagram	Installation diagram	Product Introduction
		The slide table of ACH-VAR transmission bracket can be selected from 200mm, 300mm, 500mm, and 700mm; This product can be used for transmission spectroscopy analysis.

VAR-KU6 sample holder
Diagram	Installation diagram	Product Connection
		VAR-KU6 can hold solid samples with a thickness less than 6mm and be installed on ACH-VAR transmission brackets.

Product parameters: