1t/h fully automatic sodium ion exchangerIt is specifically designed to remove calcium and magnesium ions from water, with an efficiency of up to 99%. It can also remove algae and suspended solids from water, making the treated water soft and clear. When raw water containing hardness ions passes through the resin layer inside the water softener, the calcium (Ca2+) and magnesium (Mg2+) ions in the water are exchanged and adsorbed by the resin, while the (Na2+) ions released by the same mass are released.

According to user needs, the fully automatic controller can be configured with two control methods: time control and flow control. It can also be equipped with control valves such as Runxin and Fulike, and can also choose hydraulic, pneumatic, and electric multi valve control systems

Basic principle of 1t/h fully automatic sodium ion exchanger:

The main working principle of a 1t/h fully automatic sodium ion exchanger is to use cation and anion softening to pass raw water through the cation and anion converter, removing calcium, magnesium, and sodium ions from the water. The water that comes out is just water molecules. Without other molecules, it can effectively prevent scale buildup.

When the inlet water is deep well water or the water source hardness is high, the function of using a softening water equipment is to remove the calcium and magnesium ion content in the water, reducing the calcium and magnesium ions in the water. If there is no water softener or if the water softener fails, calcium and magnesium salts will form insoluble precipitates on the surface of the reverse osmosis membrane due to a sharp increase in concentration, blocking the pores of the reverse osmosis membrane, shortening its service life, and increasing equipment maintenance costs.

According to user needs, the fully automatic controller can be configured with two control methods: time control and flow control. It can also be equipped with control valves such as Runxin and Fulike, and can also choose hydraulic, pneumatic, and electric multi valve control systems

Structure of 1t/h fully automatic sodium ion exchanger:

1. Automatic control device: According to user needs, a fully automatic controller with two control modes, time control and flow control, can be configured, and can be optionally equipped with control valves such as Runxin and Fulaik. It can also choose hydraulic, pneumatic, and electric multi valve control systems.

2. Tank body: According to user requirements, exchange tanks and salt tanks can be made of materials such as fiberglass, carbon steel lined with rubber, stainless steel, etc.

3. Accessories section: including water distribution device, salt absorption device, pipeline accessories, etc.